Color monitor MCM 1755 NTD
Preset operating modes
The monitor is preset to the following modes at the factory:
Horizontal frequency | Refresh rate | Resolution | |
|
|
|
|
31.5 kHz ± 0.5 kHz | 60 Hz ± | 2 Hz | 640 x 480 |
31.5 kHz ± 0.5 kHz | 70 Hz ± | 2 Hz | 720 x 400 |
43.3 kHz ± 0.5 kHz | 85 Hz ± | 2 Hz | 640 x 480 |
37.8 kHz ± 0.5 kHz | 84 Hz ± | 2 Hz | 720 x 400 |
50.6 kHz ± 0.5 kHz | 100 Hz ± | 2 Hz | 640 x 480 |
53.7 kHz ± 0.5 kHz | 85 Hz ± | 2 Hz | 800 x 600 |
63.0 kHz ± 0.5 kHz | 100 Hz ± | 2 Hz | 800 x 600 |
68.7 kHz ± 0.5 kHz | 85 Hz ± | 2 Hz | 1024 x 768 |
|
|
|
|
For ergonomic reasons we recommend a refresh rate of at least 75 Hz and a maximum resolution of 1024 x 768 pixels.
The display position and size have been set to optimum values at the i factory for the operating modes listed above. Depending on the monitor
controller used, it may be necessary to change these settings. If you need to do so, refer to the section entitled "Operation of the monitor" below.
Tilting and turning area
13˚
45˚
45˚
5˚
The specified tilting area refers to the zero position of the monitor foot marked with an arrow.
24 - English |
