Siemens MCM 1755 NTD manuel dutilisation Connecting the monitor

Color monitor MCM 1755 NTD

Connecting the monitor

See your PC's operating manual for details of the connectors on the system unit.

Please note the information provided in the chapter " Safety" at the ! beginning of this manual.

Do not cover the ventilation openings of the monitor.

If you are assembling monitors beside each other, there must be a minimum distance of 30 cm between monitors of the same constructional type, to avoid image distortion. With different monitors, the distance must be increased, if necessary.

The system unit's power plug must be pulled out!

1 2

1 = Power connector 2 = D-SUB connector (15-pin)

ÊBe sure that the monitor and the system unit are switched off.

The data cable supplied has two 15-pin D-SUB connectors for connection to the monitor and to the system unit.

CE conformance and optimum picture quality are guaranteed only if you ! use the data cable supplied.

Ê Connect one of the connectors of the data cable to the D-SUB connector on the monitor (2) and secure the connector by tightening the safety screws.

12 - English A26361-K472-Z100-2-5E19