DSC programming
DSC (Direct Software Control) allows you to customise certain programmable, basic set- tings to suit your personal needs and prefe- rences and then store them.
The basic settings for this audio equipment were made at the factory. In the following you can find an overview of these settings, so that you can always reset to these if desired.
If you wish to alter any of the programming,
•press DSC.
The display will show you the adjusted con- dition.
Use the rocker switch to select and adjust the functions described in the following.
TA VOL | To adjust the traffic an- |
| nouncement volume from |
| between 1 to 9. The mes- |
| sage will then come |
| through at this volume. |
| (1 = low) |
BEEP | Confirmation tone for all |
| functions which require a |
| button to be pressed for |
| more than 2 seconds. |
| The volume can be adju- |
| sted from between 0 to 9. |
| (0 = off) |
| Each alteration of this va- |
| lue is confirmed by a beep |
| tone of the corresponding |
| volume. |
LOUD | Loudness - When listening |
| at a low level, the Loud- |
| ness function creates a |
| more natural sound by |
| boosting the low frequency |
| range. |
| LOUD 1 - Low boost |
| LOUD 6 - Max. boost |
RM | (Radio Monitor) |
| With |
| automatically switch to the |
| tuner whenever the casset- |
| te is fast winding. |
| |
| switched off. |
LOCAL | (lo) |
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS
/ 
Select function
Adjust value – Adjust value +
LED (code) You can adjust the LED B to flash for extra
LED 1 - LED always flash- es when the unit has been swit- ched off via the ignition.
LED 0 - No flashing.
| To adjust the seek tuning |
| sensitivity for local recepti- |
| on. |
| LOCAL 1 - high sensitivity |
| LOCAL 3 - low sensitivity |
DIS | (dx) |
| To adjust the seek tuning |
| sensitivity for distant recep- |
| tion. |
| DIS. 1- high sensitivity |
| DIS. 3- low sensitivity |
SVENSKA ESPAÑOL PORTUGUÊS
27