KeyCard theft-protection system

Now you can also use the new KeyCard for operating your unit.

A maximum of two cards can be used per set. When trying to “define” a third one, the sy- stem will automatically delete the access authorisation of that KeyCard which was not used for the “learning” process.

Displaying the radio pass data

You can use the KeyCard supplied with the unit to display the individual radio pass data such as the model name, the type number (7 6 ...) and the serial number:

• Press and hold down preset buttons 1 and 6 while switching on the unit.

DEUTSCH

This car radio is supplied with one KeyCard as standard.

However, the unit can also be operated with a second card.

If you have lost or damaged your KeyCard, you can buy a new one from your specialised dealer.

When using two KeyCards, you can indivi- dually store the following functions:

After approximately 10 seconds, the display will show “TURN OFF”. Now turn off the set. When inserting a card of a different kind (like for example a credit card), the display will show “WRONG KC” for approximately 2 se- conds.

Remove the wrong card and turn off the set. Do not make further adjustments until you have a correct KeyCard available.

•Press the KeyCard in, which releases the card and puts it in the proper positi- on for being removed.

•Remove the first KeyCard and insert the new one while “CHANGE” is still being displayed.

FRANÇAIS ENGLISH

Bass, treble, balance and fader settings, assignments of preset buttons, Loudness, TA (traffic announcement volume), BEEP volume.

In addition to this, the settings activated be- fore switching the radio off, such as the waveband, station, TA priority, Loudness, AF, REG ON/OFF and seek tuning sensitivi- ty, will also remained stored.

This ensures that the basic settings you have programmed will automatically be activated as soon as you have inserted your KeyCard.

Putting the unit into operation

Removing the KeyCard

Never pull out the KeyCard directly.

•First press the KeyCard in.

This releases the card and puts it in the proper position for being removed.

• Now you can pull it out.

“Defining” a second KeyCard/ Replacing a KeyCard

While operating the unit with the first Key-

Card, you can “define” a second one to be • Press the TS button within 2 seconds. also used with the set:

ITALIANO NEDERLANDS SVENSKA

•Turn on the set and introduce the Key- Card into the slot with the contact area showing up (KeyCard tongue pulled out).

The car radio is now ready for operation.

If a wrong KeyCard is inserted, then “CARD ERR” will appear in the display. In this case please do not go on operating the set.

•Insert the first KeyCard and turn on the set.

•Press the DSC button and select “LEARN KC” with /.

The display will switch to “CHANGE”.

The radio pass data will move through the display several times.

To quit the function:

•Press any button.

ESPAÑOL PORTUGUÊS