Blaupunkt RCM 85 Scrolling through the broad- casting network only FM, Storing stations

Page 11

Automatic tuning

Up

Down

/ Up/down in short intervals (“AF” must be switched off)

/ To scroll through the broadcasting network when “AF” is activated (e.g. NDR1 ... NDR4).

Manual tuning << >>

(prerequisite: AF is switched off!)

Press << >>; the frequency will change in short intervals in downwards or up- wards direction.

When holding the right or left part of the rocker switch pressed down, the frequency scan is speeded up.

Scrolling through the broad- casting network (only FM)

You can use the << >> buttons to tune in stations of your reception area.

If several programmes of one broadcasting network can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY (North German broad- caster).

For this it is necessary that the stations have been received at least once and that “AF” has been activated before (lights up in the dis- play).

For this purpose, you may start Travelstore seek operation:

Press FMT for 2 seconds; the system starts to run through the frequency band.

If “AF” does not light up,

press AF.

With this, the requirements for selecting sta- tions with << >> are fulfilled.

Changing the memory bank (FM)

You can shift between the memory banks I, II and T in order to store stations and recall them later.

The currently selected memory bank is indi- cated in the display.

Press the FMT button as many times until the desired memory bank lights up in the display.

Storing stations

On FM, you can store six stations on the preset buttons 1 to 6 for each of the memory banks I, II and T.

On MW/LW, you can store six stations each.

Select the waveband with FMT or M•L and on FM also the desired memory bank (with FMT).

Tune in a station with the rocker switch (either automatically or manually).

Press the desired preset button until the radio resumes play after the muting

(takes approximately 2 seconds, confir- med by beep).

Now the station has been stored.

The activated preset button is indicated in the display.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

27

Image 11
Contents Canberra RCM English Français Contents AUD/GEO AUD On Off VolumeShort instructions CPS MTL Dolby B-NRCassette removal Press Cassette loading slot DisplaySRC Source ? 1, 2, 3, 4, 5, 6 preset buttonsFast winding/PROG button = SC/MIXImportant notes PrecautionsTraffic safety Installation/Connection Entry of a wrong code number Anti-theft protection Release panel Security codeOptical indication for extra security Switching on security codingRe-start following an interrup- tion of the power supply Switching off security codingREG regional programme Automatic tuningRadio operation with RDS Radio Data System Selecting a wavebandStoring stations Manual tuningScrolling through the broad- casting network only FM Changing the memory bank FMScanning stations with Radio-Scan Scanning stored stations with Preset ScanTo start Preset Scan Recalling stored stationsReceiving traffic programme stations with RDS-EON Switching from stereo to monoSwitching the warning beep off Prog selector Tape operationInserting a tape Removing a tapeDolby B-NR Switching the audio sourceDolby B-NR* Tape equalisation with B/MTL Skipping/repeating titles with CPSBeep DSC programmingLocal DISCD changer control optional Overview of the DSC factory settingsSwitching to changer operation Selecting a disc/track using the rocker switchCare notes SpecificationsAppendix Blaupunkt-Werke GmbH
Related manuals
Manual 19 pages 62.7 Kb Manual 20 pages 5.11 Kb