To stop the SCAN:
•Press the SC/MIX button briefly once again. The system will continue to play the currently scanned track.
MIX
Use the MIX function to play the tracks of the individual discs in random order. Note that the discs themselves will be selected in nu- meric order according to their position in the changer.
To start the MIX function:
•Press the SC/MIX button for approxi- mately 4 seconds. The CD number and ‘MIX’ will appear in the display.
To stop the MIX function:
•Press SC/MIX briefly.
Notice:
In may happen in isolated cases that the changer fails to function properly due to volta- ge drops (e.g. when starting the engine). In such a case, briefly switch the car radio off and on again.
The changer will then return to normal opera- tion.
Appendix
Care notes
Release panel
To ensure that the unit functions properly it is important that the contacts between the re- lease panel and the head unit are free from any foreign particles.
If necessary, clean the contacts using a cot- ton swab soaked with alcohol.
Mechanism/cassette tapes
To avoid possible problems, you should not use cassette tapes longer than 60 or 90 minutes (C60/C90). Store your tapes in a cool place away from dirt, dust and tempera- tures exceeding 50 ° Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust partic- les collected on the playback head or roller may lead to tape run problems and sound distortions.
Use a head cleaning tape to remove normal dirt
Specifications
Amplifier |
|
|
Output power: | 4 x 19 W RMS power | |
|
| acc. to DIN 45324/3.1 |
|
| or |
|
| 4 x 20 W max. power |
|
| acc. to DIN 45324/3.2 |
Tuner |
|
|
Wavebands |
|
|
FM | : | 87.5 – 108 MHz |
MW | : | 531 – 1602 kHz |
LW | : | 153 – 279 kHz |
FM sensitivity: | 1.0 ∝V at 26 dB | |
|
| |
FM frequency |
| |
response: |
| 35 - 16 000 Hz |
Tape player |
| |
Frequency |
|
|
response: |
| 35 - 16 000 Hz |
Subject to modifications!
34