Blaupunkt RCM 85 operating instructions Anti-theft protection, Release panel, Security code

Page 8

Do not connect the loudspeaker outputs to ground!

Use only the accessory and replacement parts approved by Blaupunkt.

Anti-theft protection

Release panel

This unit is equipped with a release panel (detachable face).

You can remove the control face at the push of a button.

For extra anti-theft protection, we recom- mend you to take the detachable face with you when leaving your car.

Re-inserting the release panel is child’s play. The set will be ready for use immediately; you will find all the previous settings re-adjusted.

Detaching the release panel

Press RELEASE.

The unit will be switched off automatically. The control panel will be released in order for you to detach it.

Store it in a safe place, excluding possible damages.

Fitting the release panel

Insert the panel on the left side first with the cassette slot facing up and then

press on the right until it locks in.

The unit is now ready for use with the settings adjusted before removing the panel.

Security code

This car radio is supplied with inactive code protection. In order to switch the security coding system on, proceed as described in the following.

If the coding system is active while the power supply to the system is interrupted (e.g. theft, disconnection of the car battery), the set will be electronically blocked. In such a case it can only be made operable again by entering the correct code number given in the car radio passport.

Entry of a wrong code number

It should not be possible for a thief to find out the correct code number by trial and error. This is why the set will be blocked for a certain period of time after a wrong code number has been entered. The display will then show “CODE ERR”.

After the first three unsuccessful attempts, the system will lock for 8 seconds; after further attempts, the waiting time extends to one hour.

24

Image 8
Contents Canberra RCM English Français Contents AUD/GEO AUD On Off VolumeShort instructions MTL Dolby B-NR Cassette removal Press Cassette loading slotDisplay CPS? 1, 2, 3, 4, 5, 6 preset buttons Fast winding/PROG button= SC/MIX SRC SourcePrecautions Traffic safetyInstallation/Connection Important notesAnti-theft protection Release panelSecurity code Entry of a wrong code numberSwitching on security coding Re-start following an interrup- tion of the power supplySwitching off security coding Optical indication for extra securityAutomatic tuning Radio operation with RDS Radio Data SystemSelecting a waveband REG regional programmeManual tuning Scrolling through the broad- casting network only FMChanging the memory bank FM Storing stationsScanning stored stations with Preset Scan To start Preset ScanRecalling stored stations Scanning stations with Radio-ScanReceiving traffic programme stations with RDS-EON Switching from stereo to monoSwitching the warning beep off Tape operation Inserting a tapeRemoving a tape Prog selectorSwitching the audio source Dolby B-NR* Tape equalisation with B/MTLSkipping/repeating titles with CPS Dolby B-NRDSC programming LocalDIS BeepOverview of the DSC factory settings Switching to changer operationSelecting a disc/track using the rocker switch CD changer control optionalCare notes SpecificationsAppendix Blaupunkt-Werke GmbH
Related manuals
Manual 19 pages 62.7 Kb Manual 20 pages 5.11 Kb