Tape operation
b)Switch off the priority for traffic an- nouncements:
•Press TA.
“TA” will disappear from the display.
Automatic seek tuning start (tape operation)
When leaving the reception area of the tuned in traffic programme station while listening to a tape, the system will automatically start searching for a new TA programme.
Inserting a tape
•Turn on the set.
•Insert a tape.
Insert the tape with side A or 1 showing up, the open side facing to the right.
= Press to eject the tape.
Fast Rewind
•Press FR.
At the beginning of the tape, the me- chanism will automatically start play-
back.
Stopping Fast Rewind operation
•Press FF.
To switch to the other tape side: Press simultaneously.
If no such station is found within approxima- tely 30 seconds, tape operation will be stop- ped and a warning beep will sound.
To switch the warning beep off, proceed as described above.
Adjusting the volume for traffic announcements and the warning beep
This volume was preset at the factory.
The tape will be played in the direction used last.
Removing a tape
•Press 
.
The cassette will eject.
FR : Fast rewind; stop by pressing FF.
FF : Fast forward; stop by pressing FR.
PROG selector
You can alter the value using the DSC function (see “DSC programming, TA”).
Fast Forward/Rewind
Fast Forward
•Press FF.
At the end of a tape side, the mecha- nism changes directions automatically to play the other side.
Stopping Fast Forward operation
•Press FR.
To change the tape direction during cassette playback
•Press FR and FF simultaneously.
At the end of a tape side, the mechanism changes directions automatically to play the other side (Autoreverse). The display shows
30