ADJUSTING THE DISPLAY SETTINGS
➮Press the softkey 5 assigned to the “COLOR” display item.
➮Press the softkey 5 assigned to the “USER” display item.
➮In the following menu you can set the red, blue and green colour
components yourself. To do so, press the appropriate softkey 5 repeatedly until the displayed col- our suits your tastes.
➮Press the joystick OK 8 or the MENU button 9 to close the menu.
The settings are saved.
Selecting a display illumination colour during a colour scan
➮Press the MENU button 9.
➮Press the softkey 5 assigned to the “DISPLAY” display item.
➮Press the softkey 5 assigned to the “COLOR” display item.
➮Press the softkey 5 assigned to the
The device starts changing the display illumination colour.
➮If you want to select one of the col- ours, press the softkey 5 as- signed to the “SAVE” display item.
➮If you want to switch back to the
previous menu without changing the colour, press the softkey 5 as- signed to the “BREAK” display item.
➮Press the joystick OK 8 or the MENU button 9 to close the menu.
The settings are saved.
Configuring the spectrum analyser
The spectrum analyser in your display provides a symbolic representation of the sound system’s output level. If the spectrum analyser is switch on, it will appear automatically after a short time if you refrain from pressing a button whilst an audio source is playing.
You can also choose to deactivate the spectrum analyser.
Switching the spectrum analyser on/off
➮Press the MENU button 9.
➮Press the softkey 5 assigned to the “DISPLAY” display item.
➮Repeatedly press the softkey 5 assigned to the “SPECTRUM” dis- play item until the “SPECTRUM OFF” or “SPECTRUM ON” setting that you want is displayed in the top display line.
➮Press the joystick OK 8 or the MENU button 9 to close the menu.
The settings are saved.
70