Additional navigation functions
Additional navigation functions
The features described in this chapter are only available once a route has been planned (with or without use of the GPS signals). (Chap. “Route planning” and chap. “Route planning without the use of GPS signals”)
Adding/Deleting a Way Point
You use the Edit Way Points menu to add/ delete Way Points. You can also use this menu to change your route directly on the map. You can use Way Points to:
•Expand your route by an additional destination (destination is added at the end of the route)
•Enter an intermediate destination
Please read the section “Entering a route” in the “Navigation” chapter and the chapter “Using the map”.
Driving a route (Simulation)
You can use the Lucca to run a simulation of your journey to get an overview of the route.
➜Press the Route button in the Navigation menu.
The Route menu opens.
➜Press the Simulation button. The Lucca will now display the map start the simulation.
➜
Press the Back button or on a random point on the map to stop/finish the simulation.
Itinerary
You can also use the Lucca to view a description of your route and you can use it to:
•View particular sections of the route on the map
•Block particular sections of the route
NB:
When blocking sections of a route during route guidance, the route will be
➜Press the Route button in the Navigation menu.
The Route menu opens.
➜Press the Itinerary button. The Itinerary menu opens.
➜Press on a road shown in the description to highlight it.
➜Press Avoid … to block this particular section of the route.
The Avoid menu opens.
➜Press Manoeuvre to skip the selected manoeuvre, e.g. to circumvent a particular junction.
-or -
➜Press on Road to circumvent the selected road.
-or -
➜Press on a more distant point to block this particular section of the route (starting from the selected road).
➜Press on Show to view this particular section of the route on the map.
The Lucca will now plan the route anew and display the map.
NB:
If you want to remove the block placed on a section of the route, you first have to end route guidance and then select the destination again under Edit Way Points in the History menu to continue route guidance.
29