Basic settings
The Brightness menu opens.
➜Slide the Set custom backlight value for daylight controller along the bar to adjust the brightness for day mode.
➜Slide the Set custom backlight value at night controller along the bar to adjust the brightness for night mode.
Smart Zoom
You can use the Smart Zoom menu to:
•Activate/deactivate automatic zoom
•Activate/deactivate overview mode
•Reactivate position location
The Smart Zoom function enables the Lucca to optimally adapt the map’s scale to the relevant drive situations encountered during route guidance. When closing in on a place requiring a manoeuvre, Lucca will, for example, zoom in on the map and raise the map’s angle to enable you to get an ideal view of, e.g. the next junction. If the place associated with the next manoeuvre is still some distance away, Lucca will zoom out of the map and lower its angle to enable you to get an ideal view of the road ahead.
➜Press the Smart Zoom button in the Advanced Settings menu
You can also select the map view to automatically switch to overview mode:
➜Press Enable Overview Mode to activate (tick) or deactivate (no tick) this function.
You can also select for Overview mode to be switched off again before a manoeuvre. In this case, the map will be zoomed in again just before a manoeuvre, such as turning off at a junction:
➜Slide the Route event distance for Overview mode controller along the bar to select the distance before a manoeuvre at which Overview mode is turned off.
This is the distance at which Overview mode will now be turned off.
➜Slide the Overview zoom level controller along the bar to select the zoom for the overview map.
When the map is moved, your position on the map will be located and locked. You can use the restore Position Lock function to make the map switch automatically back to showing your current position after a certain period of time:
➜Press the Restore
The Smart Zoom menu opens.
➜Press the Smart Zoom button to activate (tick) or deactivate (no tick) the Smart Zoom.
➜Slide the
➜Slide the
In Overview mode, the map will be shown in two dimensions. It will be minimised and oriented to North. This enables you to clearly see your location on the map, e.g. during long journeys travelling on the motorway.
If you use the Reactivate Smart Zoom function, Lucca will automatically reactivate Smart Zoom after you have zoomed in or moved the map:
➜Press the Restore Smart Zoom button to activate (tick) or deactivate (no tick) this function.
You can also select a time period for the reactivation of the Position Lock and Smart Zoom function:
➜Slide the Delay before restoring button along the bar to select the time period for reactivation.
Route settings
You can use the Route Settings menu to activate/deactivate
36