JVC GET0122-001A manual Prohibiting cassette ejection, Playing the current tune repeatedly

Page 22

ENGLISH

Playing the current tune repeatedly

You can play the current tune repeatedly (Repeat Play).

1 Press MODE to enter the functions mode while playing a tune you want to hear over again on a cassette.

“MODE” flashes on the upper part of the display.

2 Press RPT (repeat), while “MODE” is still on the display, so that “REPEAT” appears on the display.

Lights up when Repeat Play is turned on.

When the tune has been played, the tape is automatically rewound to the beginning of that tune and the same tune will be played again.

To cancel Repeat Play, repeat steps 1 and 2 again so that the RPT indicator goes off.

Note:

In the following cases, Blank Skip and Repeat Play may not operate correctly:

Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions during tunes.

Tapes with short non-recorded sections.

Tapes with high level noise or humming between tunes.

Tapes with tunes recorded at low recording levels.

The Dolby NR setting does not match. For example, if Dolby B NR is on and the tape was recorded with no Dolby NR.

Prohibiting cassette ejection

You can prohibit cassette ejection and lock a

cassette in the cassette compartment.

While pressing TAPE CD-CH, press and

hold for more than 2 seconds.

“NO EJECT” flashes on the display for about 5 seconds, and the cassette is locked and cannot be ejected.

To cancel the prohibition and unlock the cassette

While pressing TAPE CD-CH, press and hold

again for more than 2 seconds.

“EJECT OK” flashes on the display for about 5 seconds, and the cassette is unlocked.

Note:

If you press 0 while cassette ejection is prohibited, the control panel flips down, but the cassette continues to play and cannot be ejected.

22

Image 22
Contents KS-FX945R Indicator lights up How to reset your unitHow to use the Mode button Pressing Mode again also clears the functions modeContents Control panel Location of the ButtonsDisplay window Remote controller Remove the battery holder Preparing the remote controllerInstalling the battery Place the batteryTo turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsSet the clock system Setting the clockFinish the setting Set the minuteSearching a station automatically Auto search Radio OperationsListening to the radio Searching a station manually Manual searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory FM 1 FM 2 FM 3 a M F1 F2 F3 Manual presetTune in to a station in this example, of 92.5 MHz FollowsWhat you can do with RDS RDS OperationsTo use Network-Tracking Reception Press TP PTY to activate TA Standby Reception Using TA Standby ReceptionPress TP PTY again. The TP indicator goes off To deactivate the TA Standby ReceptionUsing PTY Standby Reception To deactivate the PTY Standby ReceptionSelect one of the twenty-nine PTY Searching your favorite programmeTo store your favorite programme types Codes. SeePress and hold TP PTY for more To activate programme search, follow the procedure belowTo search your favorite programme type Than 2 seconds while listening to anChanging the display mode while listening to an FM station Setting the TA volume levelAutomatic clock adjustment PS NamePTY codes Same programme can be received on different frequenciesTo stop play and eject the cassette Tape OperationsListening to a cassette To fast-forward and rewind a tapeDolby B NR To cancel the Dolby B NR, repeat stepsFinding the beginning of a tune To play back tapes recorded withYou can skip blank portions between the tunes Blank Skip Skipping the blank portions on the tapeNow Blank Skip is Activated Prohibiting cassette ejection To cancel the prohibition and unlock the cassettePlaying the current tune repeatedly Press Mode to enter the functions mode Sound AdjustmentsSelecting preset sound modes C-EQ custom equalizer Select the sound mode you wantBAS Adjusting the soundVOL Ex. When you select Level Ex. When you select Audio Basic ProcedureOther Main Functions See Preferred Setting Mode PSM itemsIndications 24H/12HTo select the dimmer mode-DIMMER To set the clock display-CLOCKTo select the level meter-LEVEL To select the telephone muting-TELTo turn on/off the key-touch tone-BEEP To select the scroll mode-SCROLLTo turn the tag display on or off To select the external component to useDetaching the control panel ConnectorsAttaching the control panel Playing discs CD Changer OperationsAbout MP3 discs Select the CD changer CDElapsed playing time Current file number To change the display informationTrack title file name*5 For MP3 discsTo go to the next or previous tracks/files To go to a particular disc directlyTo fast-forward or reverse the track/file Disc title / performer Track titleTo go to a track/file quickly How to go to the desired track/file quicklyTo skip to the next or previous folder only for MP3 discs MAG RND To play back tracks/files at randomRandom Play TRK RPT Fldr RPTSelect the external component Line External Component OperationsTape Line Select the DAB tuner What is DAB system?DAB Tuner Operations DAB FM/AMTo restore the FM/AM tuner Storing DAB services in memoryTo tune in to a particular ensemble without searching Tuning in to a preset DAB service To select the next service To select the previous serviceWhat you can do more with To adjust the DAB volume levelWhile receiving a DAB service To use Alternative ReceptionConnections TroubleshootingSymptoms Causes Remedies TapeChanger To keep the tape clean MaintenanceTo clean the head Ignition key-off release/Ignition key-on playMW Tuner SpecificationsLW Tuner Having Trouble with operation? KS-FX945R Screws are used, they could damage the unit 30˚Before removing the unit, release the rear section Electrical Connections Be sure to ground this unit to the car’s chassisKS-FX945R Power cannot be turned on Питание не включаетсяJVC Amplifier JVC DAB tuner JVC CD changer