JVC GET0122-001A manual Radio Operations, Listening to the radio

Page 9

RADIO OPERATIONS

ENGLISH

Listening to the radio

You can use either automatic searching or manual searching to tune in to a particular station.

Searching a station automatically: Auto search

1 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as follows:

FM 1

 

FM 2

 

FM 3

 

A M

 

 

 

(F1)

 

(F2)

 

(F3)

Selected band appears*.

Lights up when receiving an FM stereo broadcast with sufficient signal strength.

*When “CLOCK” is set to “ON” (see page 27), the current indication will soon change to the clock time.

Note:

This receiver has three FM bands (FM1, FM2,

FM3).

 

• FM1/FM2:

87.5 MHz to 108.0 MHz

• FM3:

65.00 MHz to 74.00 MHz

2 Start searching a station.

To search stations of

higher frequencies

To search stations of lower frequencies

When a station is received, searching stops.

To stop searching before a station is received,

press the same button you have pressed for

searching.

Searching a station manually:

Manual search

1 Select the band (FM1 – 3, AM).

Each time you press the button, the band changes as follows:

 

FM 1

 

FM 2

 

FM 3

 

A M

 

 

(F1)

 

(F2)

 

(F3)

 

 

 

 

 

 

 

 

 

Note:

This receiver has three FM bands (FM1, FM2,

FM3).

 

• FM1/FM2:

87.5 MHz to 108.0 MHz

• FM3:

65.00 MHz to 74.00 MHz

2 Press and hold ¢ or 4

until “MANU” (manual) starts flashing on the display.

CONTINUED ON THE NEXT PAGE

9

Image 9
Contents KS-FX945R How to use the Mode button How to reset your unitIndicator lights up Pressing Mode again also clears the functions modeContents Location of the Buttons Control panelDisplay window Remote controller Installing the battery Preparing the remote controllerRemove the battery holder Place the batteryTo drop the volume in a moment Turning on the powerTo turn off the power Basic OperationsFinish the setting Setting the clockSet the clock system Set the minuteListening to the radio Radio OperationsSearching a station automatically Auto search Searching a station manually Manual searchFM station automatic preset SSM When an FM stereo broadcast is hard to receiveStoring stations in memory Tune in to a station in this example, of 92.5 MHz Manual presetFM 1 FM 2 FM 3 a M F1 F2 F3 FollowsRDS Operations What you can do with RDSTo use Network-Tracking Reception Press TP PTY again. The TP indicator goes off Using TA Standby ReceptionPress TP PTY to activate TA Standby Reception To deactivate the TA Standby ReceptionTo deactivate the PTY Standby Reception Using PTY Standby ReceptionTo store your favorite programme types Searching your favorite programmeSelect one of the twenty-nine PTY Codes. SeeTo search your favorite programme type To activate programme search, follow the procedure belowPress and hold TP PTY for more Than 2 seconds while listening to anAutomatic clock adjustment Setting the TA volume levelChanging the display mode while listening to an FM station PS NameSame programme can be received on different frequencies PTY codesListening to a cassette Tape OperationsTo stop play and eject the cassette To fast-forward and rewind a tapeFinding the beginning of a tune To cancel the Dolby B NR, repeat stepsDolby B NR To play back tapes recorded withSkipping the blank portions on the tape You can skip blank portions between the tunes Blank SkipNow Blank Skip is Activated To cancel the prohibition and unlock the cassette Prohibiting cassette ejectionPlaying the current tune repeatedly Selecting preset sound modes C-EQ custom equalizer Sound AdjustmentsPress Mode to enter the functions mode Select the sound mode you wantAdjusting the sound BASVOL Basic Procedure Ex. When you select Level Ex. When you select AudioOther Main Functions Indications Preferred Setting Mode PSM itemsSee 24H/12HTo select the level meter-LEVEL To set the clock display-CLOCKTo select the dimmer mode-DIMMER To select the telephone muting-TELTo turn the tag display on or off To select the scroll mode-SCROLLTo turn on/off the key-touch tone-BEEP To select the external component to useConnectors Detaching the control panelAttaching the control panel About MP3 discs CD Changer OperationsPlaying discs Select the CD changer CDTrack title file name*5 To change the display informationElapsed playing time Current file number For MP3 discsTo fast-forward or reverse the track/file To go to a particular disc directlyTo go to the next or previous tracks/files Disc title / performer Track titleHow to go to the desired track/file quickly To go to a track/file quicklyTo skip to the next or previous folder only for MP3 discs Random Play To play back tracks/files at randomMAG RND TRK RPT Fldr RPTExternal Component Operations Select the external component LineTape Line DAB Tuner Operations What is DAB system?Select the DAB tuner DAB FM/AMStoring DAB services in memory To restore the FM/AM tunerTo tune in to a particular ensemble without searching To select the next service To select the previous service Tuning in to a preset DAB serviceWhile receiving a DAB service To adjust the DAB volume levelWhat you can do more with To use Alternative ReceptionSymptoms Causes Remedies TroubleshootingConnections TapeChanger To clean the head MaintenanceTo keep the tape clean Ignition key-off release/Ignition key-on playSpecifications MW TunerLW Tuner Having Trouble with operation? KS-FX945R 30˚ Screws are used, they could damage the unitBefore removing the unit, release the rear section Be sure to ground this unit to the car’s chassis Electrical ConnectionsJVC Amplifier Power cannot be turned on Питание не включаетсяKS-FX945R JVC DAB tuner JVC CD changer