JVC GET0122-001A manual Adjusting the sound, Bas, Vol

Page 24

ENGLISH

Adjusting the sound

You can adjust the sound characteristics to your preference.

1 Select the item you want to adjust.

Each time you press the button, the adjustable items change as follows:

BAS

TRE

FAD

(bass)

(treble)

(fader)

VOL

LOUD

BAL

(volume)

(loudness)

(balance)

Indication

To do:

Range

BAS*1

Adjust the bass.

–06 (min.)

+06 (max.)

TRE*1

Adjust the treble.

–06 (min.)

+06 (max.)

FAD*2

Adjust the front

R06 (Rear only)

and rear speaker

balance.

F06 (Front only)

BAL

Adjust the left

L06 (Left only)

and right speaker

balance.

R06 (Right only)

LOUD*1

Boost low and high

frequencies to

LOUD ON

produce a well-

balanced sound

LOUD OFF

at low volume level.

VOL*3

Adjust the volume.

00

(min.)

50

(max.)

*1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including “USER.”

*2 If you are using a two-speaker system, set the fader level to “00.”

*3 Normally the control dial works as the volume control. So you do not have to select “VOL” to adjust the volume level.

2 Adjust the setting.

To increase the level or

turn on the loudness

To decrease the level or

turn off the loudness

Equalization pattern changes as you adjust the bass or treble.

Ex. 1: When you adjust “TRE” (treble)

Ex. 2: When you turn on the loudness

3 Repeat steps 1 and 2 to adjust the other items.

To reset each sound mode to the factory

settings, repeat the same procedure and

reassign the preset values listed in the table on

page 23.

24

Image 24

Contents KS-FX945R How to reset your unit How to use the Mode buttonIndicator lights up Pressing Mode again also clears the functions modeContents Location of the Buttons Control panelDisplay window Remote controller Preparing the remote controller Installing the batteryRemove the battery holder Place the batteryTurning on the power To drop the volume in a momentTo turn off the power Basic OperationsSetting the clock Finish the settingSet the clock system Set the minuteRadio Operations Listening to the radioSearching a station automatically Auto search Searching a station manually Manual searchFM station automatic preset SSM When an FM stereo broadcast is hard to receiveStoring stations in memory Manual preset Tune in to a station in this example, of 92.5 MHzFM 1 FM 2 FM 3 a M F1 F2 F3 FollowsRDS Operations What you can do with RDSTo use Network-Tracking Reception Using TA Standby Reception Press TP PTY again. The TP indicator goes offPress TP PTY to activate TA Standby Reception To deactivate the TA Standby ReceptionUsing PTY Standby Reception To deactivate the PTY Standby ReceptionSearching your favorite programme To store your favorite programme typesSelect one of the twenty-nine PTY Codes. SeeTo activate programme search, follow the procedure below To search your favorite programme typePress and hold TP PTY for more Than 2 seconds while listening to anSetting the TA volume level Automatic clock adjustmentChanging the display mode while listening to an FM station PS NamePTY codes Same programme can be received on different frequenciesTape Operations Listening to a cassetteTo stop play and eject the cassette To fast-forward and rewind a tapeTo cancel the Dolby B NR, repeat steps Finding the beginning of a tuneDolby B NR To play back tapes recorded withSkipping the blank portions on the tape You can skip blank portions between the tunes Blank SkipNow Blank Skip is Activated To cancel the prohibition and unlock the cassette Prohibiting cassette ejectionPlaying the current tune repeatedly Sound Adjustments Selecting preset sound modes C-EQ custom equalizerPress Mode to enter the functions mode Select the sound mode you wantAdjusting the sound BASVOL Basic Procedure Ex. When you select Level Ex. When you select AudioOther Main Functions Preferred Setting Mode PSM items IndicationsSee 24H/12HTo set the clock display-CLOCK To select the level meter-LEVELTo select the dimmer mode-DIMMER To select the telephone muting-TELTo select the scroll mode-SCROLL To turn the tag display on or offTo turn on/off the key-touch tone-BEEP To select the external component to useConnectors Detaching the control panelAttaching the control panel CD Changer Operations About MP3 discsPlaying discs Select the CD changer CDTo change the display information Track title file name*5Elapsed playing time Current file number For MP3 discsTo go to a particular disc directly To fast-forward or reverse the track/fileTo go to the next or previous tracks/files Disc title / performer Track titleHow to go to the desired track/file quickly To go to a track/file quicklyTo skip to the next or previous folder only for MP3 discs To play back tracks/files at random Random PlayMAG RND TRK RPT Fldr RPTExternal Component Operations Select the external component LineTape Line What is DAB system? DAB Tuner OperationsSelect the DAB tuner DAB FM/AMStoring DAB services in memory To restore the FM/AM tunerTo tune in to a particular ensemble without searching Tuning in to a preset DAB service To select the next service To select the previous serviceTo adjust the DAB volume level While receiving a DAB serviceWhat you can do more with To use Alternative ReceptionTroubleshooting Symptoms Causes RemediesConnections TapeChanger Maintenance To clean the headTo keep the tape clean Ignition key-off release/Ignition key-on playSpecifications MW TunerLW Tuner Having Trouble with operation? KS-FX945R 30˚ Screws are used, they could damage the unitBefore removing the unit, release the rear section Electrical Connections Be sure to ground this unit to the car’s chassisPower cannot be turned on Питание не включается JVC AmplifierKS-FX945R JVC DAB tuner JVC CD changer