JVC GET0122-001A Maintenance, Ignition key-off release/Ignition key-on play, To clean the head

Page 42

MAINTENANCE

ENGLISH

This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below.

To clean the head

•Clean the heads after every 10 hours of use using a wet-type head cleaning tape (available at an audio store).

When the head becomes dirty, you may realize the following symptoms:

–Sound quality is reduced.

–Sound level decreases.

–Sound drops out.

•Do not play dirty or dusty tapes.

•Do not touch the highly-polished head with any metallic or magnetic tools.

CAUTION:

•Do not play the cassettes with peeling labels; otherwise, they can damage the unit.

•Tighten tapes to remove slack since loose tape may become entangled with the mechanism.

•Do not leave a cassette in the cassette compartment after use, as the tape may become slack.

The function below is also provided to ensure the

longer life of this unit.

Ignition key-off release/Ignition key-on play

•Turning off the ignition key with a cassette in the compartment automatically releases the tape from the unit’s tapehead.

•Turning on the ignition key with a cassette in the compartment starts playback automatically if you turned off the ignition during tape play.

To keep the tape clean

•Always store the cassettes in their storage cases after use.

•Do not store cassettes in the following places:

–Subject to direct sunlight

–With high humidity

–At extremely hot temperatures

42

Image 42

Contents KS-FX945R Indicator lights up How to reset your unitHow to use the Mode button Pressing Mode again also clears the functions modeContents Location of the Buttons Control panelDisplay window Remote controller Remove the battery holder Preparing the remote controllerInstalling the battery Place the batteryTo turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsSet the clock system Setting the clockFinish the setting Set the minuteSearching a station automatically Auto search Radio OperationsListening to the radio Searching a station manually Manual searchFM station automatic preset SSM When an FM stereo broadcast is hard to receiveStoring stations in memory FM 1 FM 2 FM 3 a M F1 F2 F3 Manual presetTune in to a station in this example, of 92.5 MHz FollowsRDS Operations What you can do with RDSTo use Network-Tracking Reception Press TP PTY to activate TA Standby Reception Using TA Standby ReceptionPress TP PTY again. The TP indicator goes off To deactivate the TA Standby ReceptionUsing PTY Standby Reception To deactivate the PTY Standby ReceptionSelect one of the twenty-nine PTY Searching your favorite programmeTo store your favorite programme types Codes. SeePress and hold TP PTY for more To activate programme search, follow the procedure belowTo search your favorite programme type Than 2 seconds while listening to anChanging the display mode while listening to an FM station Setting the TA volume levelAutomatic clock adjustment PS NamePTY codes Same programme can be received on different frequenciesTo stop play and eject the cassette Tape OperationsListening to a cassette To fast-forward and rewind a tapeDolby B NR To cancel the Dolby B NR, repeat stepsFinding the beginning of a tune To play back tapes recorded withSkipping the blank portions on the tape You can skip blank portions between the tunes Blank SkipNow Blank Skip is Activated To cancel the prohibition and unlock the cassette Prohibiting cassette ejectionPlaying the current tune repeatedly Press Mode to enter the functions mode Sound AdjustmentsSelecting preset sound modes C-EQ custom equalizer Select the sound mode you wantAdjusting the sound BASVOL Basic Procedure Ex. When you select Level Ex. When you select AudioOther Main Functions See Preferred Setting Mode PSM itemsIndications 24H/12HTo select the dimmer mode-DIMMER To set the clock display-CLOCKTo select the level meter-LEVEL To select the telephone muting-TELTo turn on/off the key-touch tone-BEEP To select the scroll mode-SCROLLTo turn the tag display on or off To select the external component to useConnectors Detaching the control panelAttaching the control panel Playing discs CD Changer OperationsAbout MP3 discs Select the CD changer CDElapsed playing time Current file number To change the display informationTrack title file name*5 For MP3 discsTo go to the next or previous tracks/files To go to a particular disc directlyTo fast-forward or reverse the track/file Disc title / performer Track titleHow to go to the desired track/file quickly To go to a track/file quicklyTo skip to the next or previous folder only for MP3 discs MAG RND To play back tracks/files at randomRandom Play TRK RPT Fldr RPTExternal Component Operations Select the external component LineTape Line Select the DAB tuner What is DAB system?DAB Tuner Operations DAB FM/AMStoring DAB services in memory To restore the FM/AM tunerTo tune in to a particular ensemble without searching Tuning in to a preset DAB service To select the next service To select the previous serviceWhat you can do more with To adjust the DAB volume levelWhile receiving a DAB service To use Alternative ReceptionConnections TroubleshootingSymptoms Causes Remedies TapeChanger To keep the tape clean MaintenanceTo clean the head Ignition key-off release/Ignition key-on playSpecifications MW TunerLW Tuner Having Trouble with operation? KS-FX945R 30˚ Screws are used, they could damage the unitBefore removing the unit, release the rear section Electrical Connections Be sure to ground this unit to the car’s chassisKS-FX945R Power cannot be turned on Питание не включаетсяJVC Amplifier JVC DAB tuner JVC CD changer