JVC GET0122-001A manual Specifications, MW Tuner, LW Tuner

Page 43

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front:

50 W per channel

Rear:

50 W per channel

Continuous Power Output (RMS):

Front:

19 W per channel into 4 , 40 Hz

 

to 20 000 Hz at no more than

 

0.8% total harmonic distortion.

Rear:

19 W per channel into 4 , 40 Hz

to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 (4 to 8 allowance) Tone Control Range:

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.0V/20 kload (250 nWb/m) Output Impedance: 1 k

TUNER SECTION

Frequency Range:

 

FM1/FM2:

87.5 MHz to 108.0 MHz

FM3:

65.00 MHz to 74.00 MHz

AM:

(MW)

522 kHz to 1 620 kHz

 

(LW)

144 kHz to 279 kHz

CASSETTE DECK SECTION

Wow & Flutter: 0.11% (WRMS)

Fast-Wind Time: 100 sec. (C-60) Frequency Response (Dolby B NR OFF):

30 Hz to 16 000 Hz (Normal tape) Signal-to-Noise Ratio: 56 dB (Normal tape)

(Dolby B NR ON): 65 dB

(Dolby B NR OFF): 56 dB

Stereo Separation: 40 dB

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature: 0°C to +40°C Dimensions (W H D):

Installation Size (approx.):

182 mm 52 mm 150 mm Panel Size (approx.):

188 mm 58 mm 12 mm Mass (approx.):

1.5 kg (excluding accessories)

Design and specifications are subject to change

ENGLISH

[FM Tuner]

without notice.

Usable Sensitivity:

11.3dBf (1.0 V/75 )

50 dB Quieting Sensitivity:

16.3dBf (1.8 V/75 )

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 V

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 V

43

Image 43
Contents KS-FX945R Pressing Mode again also clears the functions mode How to reset your unitHow to use the Mode button Indicator lights upContents Control panel Location of the ButtonsDisplay window Remote controller Place the battery Preparing the remote controllerInstalling the battery Remove the battery holderBasic Operations Turning on the powerTo drop the volume in a moment To turn off the powerSet the minute Setting the clockFinish the setting Set the clock systemSearching a station manually Manual search Radio OperationsListening to the radio Searching a station automatically Auto searchWhen an FM stereo broadcast is hard to receive FM station automatic preset SSMStoring stations in memory Follows Manual presetTune in to a station in this example, of 92.5 MHz FM 1 FM 2 FM 3 a M F1 F2 F3What you can do with RDS RDS OperationsTo use Network-Tracking Reception To deactivate the TA Standby Reception Using TA Standby ReceptionPress TP PTY again. The TP indicator goes off Press TP PTY to activate TA Standby ReceptionTo deactivate the PTY Standby Reception Using PTY Standby ReceptionCodes. See Searching your favorite programmeTo store your favorite programme types Select one of the twenty-nine PTYThan 2 seconds while listening to an To activate programme search, follow the procedure belowTo search your favorite programme type Press and hold TP PTY for morePS Name Setting the TA volume levelAutomatic clock adjustment Changing the display mode while listening to an FM stationSame programme can be received on different frequencies PTY codesTo fast-forward and rewind a tape Tape OperationsListening to a cassette To stop play and eject the cassetteTo play back tapes recorded with To cancel the Dolby B NR, repeat stepsFinding the beginning of a tune Dolby B NRYou can skip blank portions between the tunes Blank Skip Skipping the blank portions on the tapeNow Blank Skip is Activated Prohibiting cassette ejection To cancel the prohibition and unlock the cassettePlaying the current tune repeatedly Select the sound mode you want Sound AdjustmentsSelecting preset sound modes C-EQ custom equalizer Press Mode to enter the functions modeBAS Adjusting the soundVOL Ex. When you select Level Ex. When you select Audio Basic ProcedureOther Main Functions 24H/12H Preferred Setting Mode PSM itemsIndications SeeTo select the telephone muting-TEL To set the clock display-CLOCKTo select the level meter-LEVEL To select the dimmer mode-DIMMERTo select the external component to use To select the scroll mode-SCROLLTo turn the tag display on or off To turn on/off the key-touch tone-BEEPDetaching the control panel ConnectorsAttaching the control panel Select the CD changer CD CD Changer OperationsAbout MP3 discs Playing discsFor MP3 discs To change the display informationTrack title file name*5 Elapsed playing time Current file numberDisc title / performer Track title To go to a particular disc directlyTo fast-forward or reverse the track/file To go to the next or previous tracks/filesTo go to a track/file quickly How to go to the desired track/file quicklyTo skip to the next or previous folder only for MP3 discs TRK RPT Fldr RPT To play back tracks/files at randomRandom Play MAG RNDSelect the external component Line External Component OperationsTape Line DAB FM/AM What is DAB system?DAB Tuner Operations Select the DAB tunerTo restore the FM/AM tuner Storing DAB services in memoryTo tune in to a particular ensemble without searching To select the next service To select the previous service Tuning in to a preset DAB serviceTo use Alternative Reception To adjust the DAB volume levelWhile receiving a DAB service What you can do more withTape TroubleshootingSymptoms Causes Remedies ConnectionsChanger Ignition key-off release/Ignition key-on play MaintenanceTo clean the head To keep the tape cleanMW Tuner SpecificationsLW Tuner Having Trouble with operation? KS-FX945R Screws are used, they could damage the unit 30˚Before removing the unit, release the rear section Be sure to ground this unit to the car’s chassis Electrical ConnectionsJVC DAB tuner JVC CD changer Power cannot be turned on Питание не включаетсяJVC Amplifier KS-FX945R