Playing the current tune repeatedly
You can play the current tune repeatedly (Repeat Play).
1Press MODE to enter the functions mode while playing a tune you want to hear over again on a cassette. This unit enters the functions mode.
2Press RPT (repeat), while still in the functions mode, so that the RPT indicator lights up on the display.
MODE | 11 RPT |
Lights up when Repeat Play is turned on.
Prohibiting cassette ejection
You can prohibit cassette ejection and can “lock” a cassette in the cassette compartment.
Press and hold TAPE 23 and 0for more than 2 seconds. “NO EJECT” flashes on the display for about 5 seconds, and the cassette is “locked.”
To cancel the prohibition and “unlock” the
cassette, press and hold TAPE 23 and 0 for more than 2 seconds again. “EJECT OK” flashes for about 5 seconds, and this time the cassette is “unlocked.”
ENGLISH
When the tune has been played, the tape is automatically rewound to the beginning of that tune and the same tune will be played again.
To cancel Repeat Play, repeat steps 1 and 2 again so that the RPT indicator goes off.
Note:
In the following cases, Blank Skip and Repeat Play may not operate correctly:
–Tapes with tunes having long pianissimo passages (very quiet parts) or
–Tapes with short
–Tapes with high level noise or humming between tunes.
–Tapes with tunes recorded at low recording levels.
Note:
If you press 0 while cassette ejection is prohibited, the cassette will not be ejected.
11