JVC KS-FX711, GET0063-001A, KS-FX511 manual Selecting the level display

	Canceling Advanced SCM
ENGLISH
	—SCM LINK
	You can cancel the Advanced SCM (Sound
	Control Memory), and unlink the sound modes
	and the playback sources.
	When shipped from the factory, a different sound
	mode can be stored in memory for each source
	so that you can change the sound modes simply
	by changing the sources.
	• LINK ON: Advanced SCM (different sound
	modes for different sources.)
	• LINK OFF: Conventional SCM (one sound
	mode for all sources.)
	1 Press and hold SEL (select) for
	more than 2 seconds.
	“CLOCK H,” “CLOCK M,” “SCM LINK,”
	“LEVEL,” “B. SKIP” or “EXT IN*” appears on
	the display.
		* Displayed only when one of
	S E L	the following sources is
		selected — FM, AM and
		Tape.

2 Select “SCM LINK” if not shown on the display.

CLOCK H CLOCK M

¢
4	EXT IN	SCM LINK
	B. SKIP	LEVEL

3 Select the desired mode—“LINK ON” or “LINK OFF.”

LINK ON LINK OFF

4 Finish the setting.

S E L

Selecting the level display

—LEVEL

You can select the level display according to your preference.

When shipped from the factory, “AUDIO2” is selected.

•	AUDIO1:	Level meter illuminates.
• AUDIO2:		Alternates level meter and
		illumination display.
•	OFF:	Erases the audio level indicator.

1 Press and hold SEL (select) for more than 2 seconds.

“CLOCK H,” “CLOCK M,” “SCM LINK,” “LEVEL,” “B. SKIP” or “EXT IN*” appears on the display.

* Displayed only when one of

S E L the following sources is selected — FM, AM and Tape.

2 Select “LEVEL” if not shown on the display.

CLOCK H CLOCK M

¢
4	SCM LINK
EXT IN
B. SKIP	LEVEL

16