JVC KS-FX511, GET0063-001A, KS-FX711 manual Select the desired mode-AUDIO 1, Audio 2 or OFF

3 Select the desired mode—“AUDIO 1,” “AUDIO 2” or “OFF.”

AUDIO1 AUDIO2

OFF

1 Press and hold SEL (select) for more than 2 seconds.

“CLOCK H,” “CLOCK M,” “SCM LINK,” “LEVEL,” “B. SKIP” or “EXT IN*” appears on the display.

	* Displayed only when one of
S E L	the following sources is
	selected — FM, AM and
	Tape.

ENGLISH

4 Finish the setting.

S E L

Selecting the external component to use—EXT IN

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component – CD changer or external component – to use.

When shipped from the factory, CD changer is selected as the external component.

• LINE IN: To use the external component other than CD changer.

• CHANGER: To use the CD changer.

Note:

For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/Connection Manual (separate volume).

2 Select “EXT IN” if not shown on the display.

	CLOCK H	CLOCK M
¢
4	EXT IN	SCM LINK
	B. SKIP	LEVEL

3 Select the desired mode—“LINE IN” or “CHANGER.”

LINE IN CHANGER

4 Finish the setting.

S E L

17