JVC KS-FX511 manual Maintenance, Ignition key-off release/Ignition key-on play, To clean the head

Page 26

MAINTENANCE

ENGLISH

This unit requires very little attention, but you will be able to extend the life of the unit if you follow the instructions below.

To clean the head

Clean the head after every 10 hours of use using a wet-type head cleaning tape (available at an audio store).

When the head becomes dirty, you may realize the following symptoms:

Sound quality is reduced.

Sound level decreases.

Sound drops out.

Do not play dirty or dusty tapes.

Do not touch the highly-polished head with any metallic or magnetic tools.

CAUTION:

Do not play the cassettes with peeling labels; otherwise, they can damage the unit.

Tighten tapes to remove slack since loose tape may become entangled with the mechanism.

Do not leave a cassette in the cassette compartment after use, as the tape may become slack.

The function below is also provided to ensure the longer life of this unit.

Ignition key-off release/Ignition key-on play

Turning off the ignition key with a cassette in the compartment automatically releases the tape from the unit’s tapehead.

Turning on the ignition key with a cassette in the compartment starts playback automatically if you turned off the ignition during tape play.

To keep the tape clean

Always store the cassettes in their storage cases after use.

Do not store cassettes in the following places:

Subject to direct sunlight

With high humidity

At extremely hot temperatures

26

Image 26
Contents KS-FX511 KS-FX711/KS-FX511KS-FX711 GET0063-001A UContents Display window Location of the ButtonsControl panel-KS-FX711 Control panel-KS-FX511 Adjust the sound as you want. See pages 12 To drop the volume in a momentTo turn off the power Basic OperationsSearching a station automatically Auto search Radio OperationsListening to the radio Searching a station manually Manual searchFM station automatic preset SSM Tune in to a station you want while M is flashingSelect the number 1 6 for the preset station you want Tuning in to a preset stationManual preset Tune in to a station in this example, of 88.3 MHzTo stop play and eject the cassette Tape OperationsListening to a cassette To fast-forward or rewind a tapePress and hold SEL select for more than 2 seconds Finish the settingSkipping the blank portions on the tape Press ¢ or 4 to select B. Skip blank skipProhibiting cassette ejection To cancel the prohibition and unlockPlaying the current tune repeatedly Select the item you want to adjust Sound AdjustmentsAdjusting the sound Adjust the levelWhen SCM Link is set to Link ON, select the source Using the sound control memory SCMSelect the sound mode you want Recalling the sound modesStoring your own sound adjustments To reset to the factory settingsSet the hour Setting the clockOther Main Functions Set the minuteSelecting the level display Select the desired mode-LINE in or Changer Select the desired mode-AUDIO 1, Audio 2 or OFFSelect EXT in if not shown on the display Detaching the control panel You can detach the control panel when leaving the carAttaching the control panel To fast-forward or reverse the track CD Changer OperationsPlaying CDs Select the CD automatic changer CD-CHTo play back tracks at random Random Play CanceledTo go to a particular disc directly To play back tracks repeatedly Repeat PlayExternal Component Operations Select the external component CD-CHUsing the Remote Controller Installing the batteryLocation of the buttons RM-RK31Preset stations stored Memory are erased See TroubleshootingSymptoms Causes Remedies Preset stations stored When connecting to the CD changerReset button of the CD changer Memory are erased SeeTo keep the tape clean MaintenanceTo clean the head Ignition key-off release/Ignition key-on playAM Tuner SpecificationsFM Tuner ????O??? Control panel GET0063-002ASlide the unit into the sleeve until it is locked Trim plate12V Only for KS-FX711KS-FX711 q¹œuLK Be sure to ground this unit to the car’s chassisBelow, do not connect the unit Do not connect the speaker leads of the powerSeriously damaged Speaker leads of this unit unused. Cover Disconnect the speakers from this unitConnect them to the amplifier. Leave Terminals of these unused leads with