JVC GET0063-001A Sound Adjustments, Adjusting the sound, Turning on/off the loudness function

SOUND ADJUSTMENTS

ENGLISH

Adjusting the sound

You can adjust the sound characteristics to your preference.

1 Select the item you want to adjust.

	Each time you press the
S E L	button, the adjustable items
	change as follows:

BAS		TRE		FAD
(bass)		(treble)		(fader)
	VOL		BAL
	(volume)		(balance)

Indication	To do:		Range
BAS	Adjust the bass.	–06 (min.)
		+06 (max.)
TRE	Adjust the treble.	–06 (min.)
		+06 (max.)
FAD*	Adjust the front	R06 (Rear only)
	and rear speaker
	balance.	F06 (Front only)
BAL	Adjust the left	L06 (Left only)
	and right speaker
	balance.	R06 (Right only)
VOL	Adjust the volume.	00	(min.)
		50	(max.)

2 Adjust the level.

To increase the level.

To decrease the level.

Note:

Normally, the +/– buttons work as the volume control. So you do not have to select “VOL” to adjust the volume level.

*If you are using a two-speaker system, set the fader level to “00.”

Turning on/off the loudness function

The human ear is less sensitive to low and high frequencies at low volumes.

The loudness function can boost these frequencies to produce a well-balanced sound at low volume levels.

Each time you press LOUD, the

LOUD loudness function turns on and off alternately.

12