Other convenient tuner functions
Scanning broadcast stations
1 Select “SCAN.”
*SSM 
SCAN
Canceled
*MONO 
(frequency indication)
* When receiving an FM stereo broadcast.
2 Start scanning.
Each time a broadcast is tuned in, scanning stops for about
5 seconds (tuned frequency number flashes on the display), and you can check what program is now being broadcasted.
If you want to listen to that program, press MODE button again to stop scanning.
Showing an assigned name
If you have assigned a name to a station frequency, the display shows its assigned name after the station frequency is displayed.
When the station name is displayed, the STATION indicator lights up on the display (see page 33).
Lights up
To confirm the station frequency while the
assigned name is shown, press DISP (display). Each time you press the button, the assigned name and the station frequency alternate on the display.
Note:
If no name is assigned, “NO NAME” will appear when you press DISP (display).
Selecting FM reception mode
When an FM stereo broadcast is hard to receive, follow the procedure below:
1 Select “MONO.”
SSM 
SCAN
Canceled
MONO 
(frequency indication)
2 Select FM reception mode.
FM reception mode turns on (“MONO ON”) and off (“MONO OFF”) alternately.
When the monaural mode is turned on, the sound you hear becomes monaural but reception will be improved.
Lights up when receiving an FM broadcast in stereo.
J
ENGLISH
11