JVC LVT1099-001A manual CD Operations, Playing a CD, To stop play and eject the CD

CD OPERATIONS

ENGLISH

Playing a CD

1 Insert a disc into the loading slot.

The unit turns on, draws in the CD and starts playback automatically.

CD indicator lights up.

Notes:

•When a CD is inserted upside down, the CD automatically ejects.

•When you play a CD Text, the disc title and performer appear on the display. Then the current track title appears on the display, followed by the track number and elapsed playing time. See also “Playing a CD Text” (page 15) and “Selecting the scroll mode—SCROLL” (page 32).

If a CD Text includes much text information, some may not appear on the display.

•If you play a CD with assigned name (see page 33), the assigned name appears on the display, followed by the track number and elapsed playing time. See also “Showing an assigned name” on page 15.

Total track number of	Total playing time of
the inserted disc	the inserted disc

Current track	\
	Elapsed playing time

Note on One-Touch Operation:

When a CD is already in the loading slot, pressing CD/CH turns on the unit and starts playback automatically.

To stop play and eject the CD

Press CD 0.

CD play stops and the CD automatically ejects from the loading slot (“EJECT” appears on the display). The source changes to the last selected source.

Notes:

•If the ejected disc is not removed for about

15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (CD play will not start this time.)

•You can eject the CD even when the unit is turned off.

•If you change the source, CD play also stops (without ejecting the disc).

Next time you select “CD” as the source, CD play starts from where playback had been stopped previously.

12