JVC LVT1099-001A Other Main Functions, Setting the clock, To deactivate the demonstration mode

OTHER MAIN FUNCTIONS

About the demonstration mode (DEMO MODE)

When shipped from the factory, “DEMO” is set to “DEMO ON” in this unit. The demonstration will start automatically if no sound comes in for

3 minutes. (See page 31.)

Setting the clock

After installation, set the built-in clock correctly.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 31.)

ENGLISH

To deactivate the demonstration mode

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 31.)

2 If “CLOCK HOUR” does not appear, press ¢ or 4 repeatedly until it appears.

2 Press ¢ or 4 to select “DEMO.”

3 Adjust the hour.

3

4

Press – to select “DEMO OFF.”	4 Press ¢ or 4 until
	“CLOCK MIN” (minute) appears on
	the display.
Finish the setting.

CONTINUED TO THE NEXT PAGE

29