Storing your own sound adjustments
You can adjust the sound modes to your preference and store your own adjustments in memory (USER sound mode).
•There is a time limit in doing the following procedure. If the setting is cancelled before you finish, start from step 1 again.
1 Select “EQ.”
EQ 
S.BASS
Canceled 
L.V.METER 
2 Select sound elements to adjust.
Each time you press the button, the sound elements to adjust change as follows:
LOW FREQ.* 
LOW LEVEL
MID FREQ.* 
MID LEVEL 
HIGH FREQ.* 
HIGH LEVEL 
(back to the beginning)
FREQ. (LOW, MID, HIGH):
Select the center frequency to adjust.
LEVEL (LOW, MID, HIGH):
Adjust the enhancement level.
*By pressing ¢ 
or 4 
, you can directly move as follows:
LOW FREQ. 
MID FREQ.
HIGH FREQ.
3 Adjust the selected sound element.
| • Refer to the table |
| below for adjusting the |
| selected sound |
| element. |
|
|
Indication | Range |
|
|
LOW FREQ. | 50 Hz, 80 Hz, 120 Hz |
|
|
LOW LEVEL | |
|
|
MID FREQ. | 700 Hz, 1 kHz, 2 kHz |
|
|
MID LEVEL | |
|
|
HIGH FREQ. | 8 kHz, 12 kHz |
|
|
HIGH LEVEL |
EQ level adjusted flashes
Ex.: When you adjust “LOW FREQ”
4 Repeat steps 2 and 3 to adjust the other sound elements.
5 Store the adjustments.
Your setting is stored in USER
sound mode.
ENGLISH
27