BASIC OPERATIONS
1
| 2 | |
| Note: | |
| When you use this unit for the first | |
3 | time, set the | |
page 29. | ||
|
ENGLISH
1 Turn on the power.
“HELLO!” appears on the
display.
Note on
When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
2 Select the source.
• Each time you press CD/CH, the source alternates between CD* and
• Each time you press FM/AM, the band changes to FM (FM1, FM2, FM3) and AM.
3 Adjust the volume.
To increase the volume
To decrease the volume
Volume level
Clock time
4 Adjust the sound as you want (see pages 25 – 27).
•If you need to change the level meter pattern, see page 28.
• Each time you press TAPE/AUX,
the source alternates between TAPE*** and external component (AUX INPUT).
*If a disc is not in the loading slot, you cannot select CD as the source to play. (“NO DISC” will appear on the display.)
**Without connecting the CD changer or the external component, you cannot select it as the source to play.
***If a cassette is not in the cassette compartment, you cannot select TAPE as the source to play. (“NO TAPE” will appear on the display.)
To operate the tuner, see pages 8 – 11. To play the CD, see pages 12 – 15.
To play an MP3 disc, see pages 18 – 21.
To operate the tape deck, see pages 22 – 24.
To operate the external components, see page 34. To operate the CD changer, see pages 35 – 37.
To drop the volume immediately
Press 
/ ATT briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop immediately.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press 
/ ATT for more than 1 second. “SEE YOU” appears, then the unit turns off.
•If you turn off the power while listening to a disc, the disc play will start from where playback has been stopped previously, next time you turn on the power.
•If you turn off the ignition key without turning off this unit, the unit will automatically turn on when you turn on the ignition key next time. If the last selected source is ready for playback (ex. a disc or a tape is in the unit), playback starts automatically.
7