USB device playback
Bluetooth *2
| Symptom |
| Remedy/Cause |
|
| Noise is generated. | The track played back is not an MP3/WMA track. Skip to | ||
| ||||
|
| another file. (Do not add the extension code <.mp3> or | ||
|
| <.wma> to |
| |
|
|
| ||
| “READING” keeps flashing on | • Readout time varies depending on the USB device. | ||
| the display. | • Do not use too many hierarchy or folders. |
| |
|
| • Turn off the power then on again. |
| |
|
| • Reattach the USB device again. |
| |
|
|
| ||
| “NO FILE” appears on the | Check whether the selected folder, the connected USB | ||
| display. | device, or the iPod/iPhone contains a playable file. | ||
|
|
| ||
| “NOT SUPPORT” appears on the | Skip to the next track encoded in an appropriate format | ||
| display and track skips. | or to the next |
| |
|
|
| ||
| Tracks/folders are not played | The playback order is determined by the | ||
| back in the order you have | stamp. The first track/folder written into the USB device | ||
| intended. | will be the first track/folder for playback. |
| |
|
|
| ||
| • “CANNOT PLAY” flashes on | • Attach a USB device that contains tracks encoded in | ||
| the display. | an appropriate format. |
| |
| • “NO USB” appears on the | • Reattach the USB device again. |
| |
| display. |
|
|
|
| • The unit cannot detect the |
|
|
|
| USB device. |
|
|
|
| While playing a track, sound is | The MP3/WMA tracks have not been properly copied | ||
| sometimes interrupted. | into the USB device. |
| |
|
| Copy MP3/WMA tracks again into the USB device, and | ||
|
| try again. |
|
|
|
|
|
| |
| Correct characters are not | This unit can only display letters (upper case), |
| |
| displayed (e.g. album name). | numbers, and a limited number of symbols. ( | 8) | |
| Bluetooth device does not | The unit can be connected with one Bluetooth mobile | ||
| detect the unit. | phone and one Bluetooth audio device at a time. |
| |
|
| While connecting a device, this unit cannot be detected | ||
|
| from another device. Disconnect currently connected | ||
|
| device and search again. |
| |
|
|
|
| |
| The unit does not detect the | • Check the Bluetooth setting of the device. |
| |
| Bluetooth device. | • Search from the Bluetooth device. After the device | ||
|
| detects the unit, select “OPEN” on the unit to connect | ||
|
| the device. ( | 11) |
|
|
|
|
|
|
*2 For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
38
ENGLISH