JVC KD-R610 With the Bluetooth device Device, Try to pair/connect from the Bluetooth device, Auto

Bluetooth *2

HD Radio reception

Symptom			Remedy/Cause
The unit does not make pairing	• Enter the same PIN code for both the unit and target
with the Bluetooth device.	device.
	• Select the device name from “SPECIAL,” then try to
	connect again. (		12)
	• Try to pair/connect from the Bluetooth device.
Echo or noise occurs.	Adjust the microphone unit position.
Phone sound quality is poor.	• Reduce the distance between the unit and the
	Bluetooth mobile phone.
	• Move the car to a place where you can get a better
	signal reception.
The sound is interrupted or	• Reduce the distance between the unit and the
skipped during playback of a	Bluetooth audio device.
Bluetooth audio device.	• Disconnect the device connected for “BT-PHONE.”
	• Turn off, then turn on the unit.
	• (When the sound is not yet restored,) connect the
	device again.
The connected audio device	Check whether the connected audio device supports
cannot be controlled.	AVRCP (Audio/Video Remote Control Profile).
Sound quality changes when	Fix the reception mode either to <DIGITAL> or
receiving HD Radio stations.	<ANALOG>. (		17, 26)
No sound can be heard.	• <ANALOG> is selected when receiving all digital
	broadcast of HD Radio station. Select <DIGITAL> or
	<AUTO>. (	17, 26)
	• <DIGITAL> is selected when receiving weak digital
	signals or receiving conventional radio broadcast.
	Select <ANALOG> or <AUTO>. (			17, 26)
“RESET 8” appears on the	Reconnect this unit and the HD Radio tuner box
display.	correctly, then reset the unit.

ENGLISH

39