JVC KD-LX300 manual Specifications, FM Tuner, AM Tuner

Page 31

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front:

50 W per channel

Rear:

50 W per channel

Continuous Power Output (RMS):

Front:

19 W per channel into 4 Ω, 40 Hz

 

to 20 000 Hz at no more than

 

0.8% total harmonic distortion.

Rear:

19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than 0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range:

Bass: ±10 dB at 100 Hz

Treble: ±10 dB at 10 kHz Frequency Response: 40 Hz to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-In Level/Impedance: 1.5 V/20 kΩ load

Line-Out Level/Impedance:

4.0V/20 kΩ load (full scale) Output Impedance: 1 kΩ

TUNER SECTION

Frequency Range:

FM:

87.5 MHz to 107.9 MHz

 

(with channel interval set to 200 kHz)

 

87.5 MHz to 108.0 MHz

 

(with channel interval set to 50 kHz)

AM:

530 kHz to 1 710 kHz

 

(with channel interval set to 10 kHz)

 

531 kHz to 1 602 kHz

 

(with channel interval set to 9 kHz)

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 μV/75 Ω)

Alternate Channel Selectivity (400 kHz):

65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 35 dB

Capture Ratio: 1.5 dB

[AM Tuner]

Sensitivity: 20 μV

Selectivity: 35 dB

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range:

96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F) Dimensions (W × H × D):

Installation Size:

182 mm × 52 mm × 160 mm (7-3/16" × 2-1/16" × 6-5/16")

Panel Size:

188 mm × 58 mm × 8 mm (7-7/16" × 2-5/16" × 3/8")

Mass: 1.8 kg (4.0 lbs) (excluding accessories)

Design and specifications subject to change without

notice.

If a kit is necessary for your car, consult your

telephone directory for the nearest car audio

speciality shop.

ENGLISH

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents For customer Use KD-LX300Precautions How to reset your unitInformation For U.S.A Contents Location of the Buttons How to use the number buttonsControl panel Remote controller Place the battery Preparing the remote controllerInstalling the battery Remove the battery holderTo turn off the power To drop the volume in a momentBasic Operations Searching a station manually Manual search Radio Basic OperationsListening to the radio Searching a station automatically Auto searchSelect the FM band FM1-3 you want to store FM stations into FM station automatic preset SSMWhen an FM stereo broadcast is hard to receive Tune into a station you want while M is flashingSelect the band FM1 Tuning into a preset stationManual preset Select the number 1 6 for the preset station you wantInsert a disc into the loading slot Playing a CDTo stop play and eject the CD Open the loading slotTo play back tracks at random Random Play To fast-forward or reverse the trackTo go to the next tracks or the previous tracks To go to a particular track directlyTo play back only intros Intro Scan Select text display mode while playing a CD TextProhibiting CD ejection Playing a CD TextAdjust the level Sound AdjustmentsAdjusting the sound Select the item you want to adjustSCM Beat SCM Soft SCM OFF SCM POP Using the sound control memoryTurning on/off the Bbeii function Selecting and storing the sound modesRepeat the same procedure to adjust other sound modes Storing your own sound adjustmentsTo reset to the factory settings When SCM Link is set to SCM Link ON, select the sourceOther Main Functions Setting the clockChanging the general settings PSM Basic ProcedurePreferred Setting Mode PSM items To set the clock display Clock Disp To cancel Advanced SCM SCM LinkTo select the dimmer mode To adjust the display contrast levelArea Change To adjust the line input level Line ADJTo change the AM/FM channel intervals Woofer FreqCruise 1 Cruise Controlling the volumeTo turn the demo mode on or off Demo ModeIf Audio Cruise does not function correctly To adjust the volume increase rateMove the cursor to the next or previous character position Assigning names to the sourcesSelect the character set you want while is flashing Select a characterSmall letters To erase the input charactersAvailable characters Capital lettersTo go to the next track or the previous tracks CD Changer OperationsPlaying CDs Select the CD automatic changerMode CanceledTo go to a particular disc directly To show the CD Text informationPlays Indicator RepeatedlyMode Indication Beginnings Seconds To play back tracks repeatedly Repeat PlayOperate the external component Playing an external component Using a subwooferAdjusting the sound on Select the external componentSymptoms Causes Remedies TroubleshootingReset button of the CD changer Handling CDs MaintenanceFM Tuner SpecificationsAM Tuner Call Deutsch Button Eject ERR or Eject Error appears on the displayReset button ¢ button No message appears on the displayTrim plate Fuse Placa de guarnición PIM163700Handle Manija Slot RanuraNota Be sure to keep the handles after installing itAsegúrese de conservar las manijas después de instalarlo Be sure to ground this unit to the car’s chassisBlack Negro To subwoofer see diagram B Al subwoofer véase diagrama BSuelde los alambres de alma para conectarlos con Jack para el cambiador de CD de JVCFor KD-LX300/PARA KD-LX300/POUR LE KD-LX300 KD-LX100For KD-LX100/PARA KD-LX100/POUR LE KD-LX100 KD-LX100 Important for Laser Products Playing an external component Sound AdjustmentsControl dial ¢ / 4 button Mode buttonRemote sensor SEL select button Disp display button Remote controller Preparing the remote controller Basic Operations Radio Basic Operations Storing stations in memory Ex Storing an FM station of 88.3 MHz into Starts automatically Unit draws in a CDSelecting CD playback modes To cancel the prohibition and unlock the CD Balance Adjust the volume 00 min 50 maxTo do Range Within Seconds Storing your own sound adjustments Select Clock MIN 2Adjust the minute External component Minute adjustmentArea To select the dimmer mode DimmerTo select the scroll mode Scroll To select the level meter LevelEXT Input To select the external component to useCruise 1 Cruise Cruise OFF To adjust the volume increase rate CD changer Discs Station frequencies Up to 10 characters up toAbout the available characters, see below CD Changer Operations Press Mode while playing a CD. Mode appears on the display Random1 Random2 CanceledIntro1 Intro2 Canceled Repeat1 Repeat2 CanceledPress Mode while playing a CD Mode appears on the display Playing an external component Troubleshooting Maintenance Sensitivity 20 µV Selectivity 35 dB Call Deutsch After installing the unit KD-LX300 KD-LX100 Electrical Connections Precautions on power supply and speaker connections Amplifier / Amplificador / Amplificateur

KD-LX300 specifications

The JVC KD-LX300 is an advanced car audio receiver that epitomizes modern functionality and performance, appealing to both casual listeners and audiophile enthusiasts. Its sleek design not only enhances the aesthetics of your vehicle's interior but also boasts an impressive suite of features that elevate the in-car audio experience.

At the heart of the KD-LX300 is its 2-DIN design, making it a perfect fit for a variety of vehicles. The unit is equipped with a high-quality 6.8-inch LCD touchscreen display, providing an intuitive interface for easy navigation through media sources, settings, and apps. The touchscreen display is vibrant and responsive, ensuring clarity in all lighting conditions.

One of the standout features of the KD-LX300 is its compatibility with various audio formats. It supports CD, USB, and Bluetooth streaming, allowing users to enjoy their favorite music from multiple sources. With Bluetooth technology, seamless connectivity to smartphones and other devices is a breeze, enabling hands-free calling, music streaming, and voice control. The receiver also offers advanced Bluetooth features such as dual phone pairing, allowing users to connect two phones simultaneously.

The KD-LX300 is designed with sound customization in mind, featuring a built-in 13-band equalizer, enabling users to fine-tune their music according to personal preferences. The unit also includes a high-pass filter, low-pass filter, and various sound enhancement technologies ensuring superior audio performance. For those who prioritize bass response, the receiver is compatible with subwoofers and provides dedicated outputs for optimal sound staging.

In terms of connectivity, JVC has equipped the KD-LX300 with a front USB port and an auxiliary input, allowing easy access for various devices. Additionally, it features compatibility with smartphone apps, including Apple CarPlay and Android Auto, which provide enhanced navigation and media control capabilities.

Finally, the KD-LX300 is built with durability in mind, designed to withstand the rigors of everyday use while providing high-quality sound. This robust construction, coupled with its rich feature set and user-friendly interface, makes the JVC KD-LX300 a top choice for anyone looking to upgrade their in-car audio system. With its combination of innovative technology, connectivity options, and audio performance, it stands out in the competitive car stereo market.
Top Page Image Contents