JVC KD-S611 manual Specifications, FM Tuner, MW Tuner, LW Tuner

Page 24

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

ENGLISH	Continuous Power Output (RMS):
	Maximum Power Output:
	Front:	40 watts per channel
	Rear:	40 watts per channel
	Front:	16 watts per channel into 4 Ω, 40
		to 20 000 Hz at no more than 0.8%
		total harmonic distortion.
	Rear:	16 watts per channel into 4 Ω, 40
		to 20 000 Hz at no more than 0.8%
		total harmonic distortion.

Load Impedance: 4 Ω (4 to 8 Ω allowance) Tone Control Range

Bass: ±10 dB at 100 Hz

Treble:±10 dB at 10 kHz Frequency Response: 40 to 20 000 Hz Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance: 2.0 V/20 kΩ load (full-scale)

Output Impedance: 1 kΩ

TUNER SECTION

Frequency Range

FM: 87.5 MHz to 108.0 MHz

AM: (MW) 522 kHz to 1 620 kHz (LW) 144 kHz to 279 kHz

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 to 15 000 Hz

Stereo Separation: 30 dB

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

24

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 to 20 000 Hz

Dynamic Range: 96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

GENERAL

Power Requirement

Operating Voltage: DC 14.4 volts (11 to 16 volts allowance)

Allowable Working Temperature: 0°C to +40°C

Grounding System: Negative ground Dimensions (W x H x D)

Installation Size:

182 x 52 x 150 mm Panel Size: 188 x 58 x 14 mm

Mass: 1.3 kg (excluding accessories)

Design and specifications subject to change without notice.

Image 24

Contents KD-S611 InstructionsPrecautions Position And Reproduction Of LabelsContents Turn on the power Adjust the volumeAdjust the sound as you want see pages 13 Basic OperationsRadio Operations Listening to the radioSelect the band FM1, FM2, FM3 or AM Start searching a stationFM station automatic preset SSM Storing stations in memoryManual preset Tune into a station of 88.3 MHzPress and hold the button for more than 2 seconds Tuning into a preset station Select the number 1 6 for the preset station you wantSelect the band FM1, FM2, FM3 or AM you want When an FM stereo broadcast is hard to receive Other convenient tuner functionsScanning broadcast stations Selecting FM reception soundCD Operations Playing a CDInsert a disc into the loading slot To stop play and eject the CDLocating a track or a particular portion on a CD To fast forward or reverse the trackTo go to the next track or the previous track To go to a particular track directlySelecting CD playback modes Prohibiting CD ejectionTo play back tracks at random Random Play To play back tracks repeatedly Repeat PlaySound Adjustments Adjusting the soundSelect the item you want to adjust Adjust the levelTurning on/off the loudness function Using the Sound Control Memory SCM Indication For Preset valuesSelecting and storing the sound modes Recalling the sound modes Canceling Advanced SCM Press and hold SEL for more than 2 secondsStoring your own sound adjustments Call up the sound mode you want to adjustTo adjust the bass or treble sound level Repeat the same procedure to store other settingsSetting the clock Other Main FunctionsSelecting the level display How to detach the control panel How to attach the control panel Detaching the control panel Unlock the control panelMaintenance Handling CDsTroubleshooting Symptoms Causes RemediesSpecifications FM TunerMW Tuner LW TunerHaving Trouble with operation? Please reset your unit KD-S611 Be sure to keep the handles after installing it Die Griffe nach dem Einbau auf jeden Fall aufbewahrenFuse blows Sound is distortedBe sure to ground this unit to the car’s chassis HinweisOhm Sicherstellen, daß das Gerät am Fahrwerk geerdet wird RemarqueAmplifier / Verstärker / Amplificateur