JVC KD-S30 manual Troubleshooting, Symptoms Causes Remedies, General, Playback

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

		Symptoms	Causes	Remedies
	•	Sound cannot be heard	The volume level is set to the	Adjust it to the optimum level.
		from the speakers.	minimum level.
			Connections are incorrect.	Check the cords and
General				connections.
	•	The unit does not work	The built-in microcomputer may	Press the reset button on the
		at all.	function incorrectly due to noise,	panel holder after detaching the
			etc.	control panel. (The clock setting
				and preset stations stored in
				memory are erased.)
				(See page 2.)
	•	SSM (Strong-station	Signals are too weak.	Store stations manually.
FM/AM		Sequential Memory)
		automatic preset does
		not work.
	•	Static noise while	The antenna is not connected	Connect the antenna firmly.
		listening to the radio.	firmly.
	•	CD cannot be played	CD is inserted upside down.	Insert the CD correctly.
		back.
	• CD-R/CD-RW cannot be		CD-R/CD-RW is not finalized.	• Insert a finalized CD-R/
		played back.		CD-RW.
	• Tracks on the CD-R/			• Finalize the CD-R/CD-RW
		CD-RW cannot be		with the component which you
		skipped.		used for recording.
Playback
	• CD cannot be ejected.		CD is locked.	Unlock the CD. (See page 15.)
	• CD sound is sometimes		You are driving on rough roads.	Stop playback while driving on
CD		interrupted.		rough roads.
			CD is scratched.	Change the CD.
			Connections are incorrect.	Check the cords and
				connections.
	•	“NO DISC” appears on	No CD in the loading slot.	Insert a CD into the loading slot.
		the display.
			CD is inserted incorrectly.	Insert the CD correctly.

ENGLISH

21