ENGLISH
Canceling the display demonstration
When shipped from the factory, display demonstration has been activated, and starts automatically when no operations are done for about 20 seconds.
•It is recommended to cancel the display demonstration before you use the unit for the first time.
To cancel the display demonstration, follow
the procedure below:
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 19.)
2 Select “DEMO” if not shown on the display.
3 Select “DEMO OFF.”
DEMO OFF DEMO ON
4 Finish the setting.
To activate the display demonstration, repeat
the same procedure and select “DEMO ON” in step 3.
8