JVC KD-S30 manual Installing the battery, Remove the battery holder, Place the battery

Page 6

ENGLISH

Preparing the remote controller

Before using the remote controller:

•Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between.

Remote sensor

•Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).

Installing the battery

When the controllable range or effectiveness of the remote controller decreases, replace the battery.

1.Remove the battery holder.

1)Push out the battery holder in the direction indicated by the arrow using a ball-point pen or a similar tool.

2)Remove the battery holder.

(back side)

2.Place the battery.

Slide the battery into the holder with the

+ side facing upwards so that the battery is fixed in the holder.

Lithium coin battery (product number: CR2025)

3.Return the battery holder.

Insert again the battery holder by pushing it until you hear a clicking sound.

(back side)

WARNING:

•Store the battery in a place where children cannot reach.

If a child accidentally swallows the battery, consult a doctor immediately.

•Do not recharge, short, disassemble, or heat the battery or dispose of it in a fire.

Doing any of these things may cause the battery to give off heat, crack, or start a fire.

•Do not leave the battery with other metallic materials.

Doing this may cause the battery to give off heat, crack, or start a fire.

•When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may start to give off heat, crack, or start a fire.

•Do not poke the battery with tweezers or similar tools.

Doing this may cause the battery to give off heat, crack, or start a fire.

CAUTION:

DO NOT leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time. Otherwise, it may be damaged.

6

Image 6

Contents KD-S30 For customer UseHow to reset your unit Information For U.S.AContents Location of the Buttons Control panelDisplay window Remote controller Place the battery Installing the batteryRemove the battery holder Return the battery holderTo turn off the power Turning on the powerTo drop the volume in a moment Basic OperationsFinish the setting To cancel the display demonstration, followTo activate the display demonstration, repeat Frequency Clock Setting the clockSet the minute Elapsed playing time ClockSearching for a station automatically Auto search Radio OperationsListening to the radio Searching for a station manually Manual searchStoring stations in memory FM station automatic preset SSMWhen an FM stereo broadcast is hard to receive Tune in to a station you want while M manual is flashingTuning in to a preset station Manual presetSelect the band FM1 3, AM Open the control panel CD OperationsPlaying a CD Insert a CD into the loading slotTo go to a particular track directly To stop play and eject the CDTo fast-forward or reverse the track To go to the next or previous tracksWhile pressing CD, press and hold for more than 2 seconds To cancel the prohibition and unlockProhibiting CD ejection To play back tracks repeatedly Track Repeat PlaySelect the sound mode you want Sound AdjustmentsSelecting preset sound modes C-EQ custom equalizer For Preset valuesAdjust the setting Adjusting the soundSelect the item you want to adjust Repeat steps 1 and 2 to adjust the other itemsAdjust the PSM item selected Changing the general settings PSMBasic Procedure Other Main FunctionsTo select the dimmer mode-DIMMER Preferred Setting Mode PSM itemsTo select the level meter-LEVEL To select the amplifier gain controlDetaching the control panel Attaching the control panelGeneral TroubleshootingSymptoms Causes Remedies PlaybackMaintenance Handling discsSpecifications FM TunerAM Tuner Call KD-S30 CR2025Sound is distorted NotaFuse blows Noise interfere with soundsElectrical Connections Amplifier / Amplificador / Amplificateur KD-S30