JVC KD-SHX900 manual To select the dimmer mode-Dimmer, To adjust the display brightness Bright

Page 37

To select the dimmer mode—Dimmer

When you turn on the car headlights, the display and button illumination automatically dims (Auto Dimmer).

Auto: Activates Auto Dimmer.

Off: Cancels Auto Dimmer.

On: Always activates Dimmer.

To adjust the display brightness

—Bright

You can adjust the brightness to make the display clear and legible.

To turn the tag display on or off

—ID3 Tag

An MP3 and WMA track can contain track information called “Tag” where its album name, performer, track title, etc. are recorded.

On: Shows the Tag display while playing MP3 or WMA tracks.

Off: Cancels the Tag display. Only the folder name and track name appear.

For MP3 tracks only: There are two versions– ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). When both ID3v1 and ID3v2 are recorded, ID3v2 will be shown.

To change the FM tuner selectivity

—IF Filter

In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard.

Auto: When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. (But the stereo effect will also be lost.)

Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will not be lost.

To select the external component to use

—EXT Input

To use the external component connected to the CD changer jack as the playback source through this unit, you need to select which component to use.

Changer: To use a JVC CD changer.

Sirius: To use a JVC SIRIUS Radio.

To turn on/off the key-touch tone—Beep

You can deactivate the key-touch tone if you do not want it to beep each time you press a button.

On: Activates the key-touch tone.

Off: Deactivates the key-touch tone.

To select the amplifier gain control— Amp Gain

You can change the maximum volume level of this unit. When the maximum power of the speakers is less than 50 W, select “Low Power” to prevent them from being damaged.

HighPower: You can adjust the volume level from “0” to “50.”

Low Power:You can adjust the volume level from “0” to “30.”

Off: Deactivates the built-in amplifier. (Sounds come out only from external amplifiers connected to LINE OUT/ SUBWOOFER OUT plugs.)

ENGLISH

37

Image 37
Contents For customer Use CD Receiver Receptor CON CD Recepteur CD KD-SHX900Information For U.S.A How to reset your unitContents Main Features Preparation Remote Controller-RM-RK300 Parts Identification Remote controllerControl panel Volume VOL +/- buttons Color display window Reset buttonEject / angle button Remote sensorBasic Operations Turn on the power Adjust the volumeSelect the source What information is shown on the display Select Clock Hr Adjust the hour Setting the clockListening to the radio Radio OperationsSelect the Tuner Select the band FM/AMWhile receiving a conventional station While receiving an HD Radio stationTo search for HD Radio stations only- HD-Search When HD Radio sound quality changes frequentlyWhen a conventional FM stereo broadcast is hard to receive Storing stations in memory HD Radio station automatic presettingHD-Memory Manual presetting 7While receiving an HD Radio station Changing the display patternOpen the control panel Basic Disc OperationsInsert a disc Total track number Total play time About MP3 and WMA discsLocating a folder/track Advanced Disc OperationsTo use the playback modes After making sure that No Eject? is Selected highlighted Prohibiting disc ejectionSound Adjustments-Daily Use To make further precise settings for the DSP modes To activate Compression Compensative CC Converter Making sound naturalTo activate BBE Digital Storing your own sound modes Move the cursor to SEL Select a setting itemEnter the SEL Menu To exit from the Menu operationTo adjust subwoofer output-Sub Out To adjust fader and balance-Fad/BalTo adjust the input level of each source VolAdjust Graphic Displays You want is located Repeat steps 1 to 6 on page 29 in step Downloading the filesSelect Download Select the file type-either Picture jcl or Movie jcaTo delete the stored pictures one by one Deleting the filesTo delete all the stored pictures at a time To delete the stored movieActivating the downloaded files Deleting all filesChange or adjust the setting Move the cursor to PSM General Settings-PSMChange or adjust other PSM items Enter the PSM MenuWindow PSM items Selectable settings Initial PagesPict Clock HrDemo/Link To show the display demonstrationTo select the background screen WallPaper To show the small window on the display-WindowTo select the dimmer mode-Dimmer To adjust the display brightness BrightTo turn the tag display on or off ID3 Tag To change the FM tuner selectivity If FilterAssign a title Select a character set Other Main FunctionsMove the cursor to Title on the Main Menu Enter the Title MenuDetaching the control panel Detaching the control panelAttaching the control panel Select CD changer Basic CD Changer OperationsTrack number Before operating your CD changerAdvanced CD Changer Operations To locate a disc directly using the remote controllerLocating a disc To locate a disc by displaying the disc listsFor details, see the tables on Disc Mode Plays repeatedly TrackExternal Component Operations How to clean the connectors MaintenanceHow to handle discs To keep discs cleanBasic Operations More about This ReceiverTuner Operations Basic Disc OperationsSound Adjustment-Daily Use Graphic Displays General Settings-PSMOther Main Functions Accented letters Numbers and symbols Preset EQ modeSound Preset equalizing values Mode Additional InformationFM/AM broadcast TroubleshootingDisc playback-CD/CD-R/CD-RW Preferred Setting Modes-PSM Sound adjustmentsDisc playback-MP3/WMA GraphicsFM Tuner SpecificationsAM Tuner Call Pile CR2025 RM-RK300Remarque NotaFuse blows Sound is distortedEnglish Español Français JVC CD changer KD-AR7000KD-SHX900/KD-SHX700 KD-SHX900/KD-SHX700 KD-AR7000