Kenwood DPX-MP2090U Touch Sensor Tone, Manual Clock Adjustment, Indirect Lighting, Dimmer

Page 27

•If a wrong security code is entered, "ERROR" is displayed. Enter a correct security code.

In Standby mode

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.

Display

Setting

"BEEP ON"

Beep is heard.

"BEEP OFF"

Beep canceled.

In Standby mode

Manual Clock Adjustment

1Select Clock Adjustment mode

Push the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display.

2Enter Clock Adjust mode

Press the Control knob for at least 1 second. The clock display blinks.

3Adjust the hours

Push the Control knob towards [FM] or [AM].

Adjust the minutes

Push the Control knob towards [4] or [¢].

4Exit Clock adjustment mode Press the [MENU] button.

In Standby mode

Indirect Lighting

You can illuminate the area around the display with soft indirect lighting.

Display

Setting

"LGHT ON"

Turns indirect lighting on.

"LGHT OFF"

Turns indirect lighting off.

Display Illumination Control

This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.

Display

Setting

"DISP ON"

Keeps the display on.

"DISP OFF"

Turns off the display when you perform no

 

operation for 5 seconds.

•When the display is off, pressing any key will turn on the display.

•When the display is off, you cannot perform any operation except for the following:

•Volume

•Attenuator

•Selecting the source

•Ejecting the disc

•Turning off the power

•During function control, such as the Menu System, the display stays on.

In Standby mode

Dimmer

Dimming this unit’s display automatically when the vehicle light switch is turned ON.

Display

Setting

"DIM ON"

The display dims.

"DIM OFF"

The display doesn’t dim.

In Standby mode

Switching preout

Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.)

Display

Setting

"SWPRE R"

Rear preout.

"SWPRE SW"

Subwoofer preout.

English 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents DPX-MP2090U Contents Lens Fogging Safety precautionsTo prevent injury or fire, take the following precautions Do Not Load 8 cm 3 in. CDs in the CD slotCleaning the Unit How to reset your unitAuto Ensemble Memory Entry Marking of products using lasers Except for some areasAutomatic Switching DAB priority About DAB Tuner controlAbout CDs About USB device Operation About USB deviceAvailable USB devices About the Connection of the USB deviceAbout AAC, MP3 and WMA Playing order of the Audio file Selecting the Source General featuresPower VolumeAudio Control Sound setting DisplaySelect the Basic Audio item to adjust Press the VOL knob System QAudio Setup Adjusting the detail of Audio ControlSpeaker Setting Subwoofer OutputTEL Mute Audio file source Switching DisplayTuner source CD & External disc sourceTuner/TV control features TuningTuning Mode Frequency Step Setting Direct Access TuningStation Preset Memory Preset TuningDirect TV Tuning TV TuningTV channel Preset Memory Preset TV TuningCD/USB device/Audio file/External disc control features Playing CD & Audio filePlaying USB device Disc Search/Folder Search Playing External DiscFast Forwarding and Reversing Track/File SearchScan Play Direct Track/File SearchDirect Disc Search Track/File/Disc/Folder RepeatAll Random Play Select modeCancelling the All Random Play Magazine Random PlayFolder name display Displays the current folder name File Select modeFolder Select 1 mode Select the file Push the Control knob towards 4 or ¢Folder Select 2 mode Switching the Play modeCheck the name of upper level folder Selected initial group plays Cancelling the Letter SeekLetter Seek Text/Title ScrollSelect the Beep display You can continue by returning to and setting other itemsExit Menu mode Press the Menu button Menu systemTo deactivate the Security Code function Activating Security CodeDeactivating Security Code Approved is displayed Security Code function activatesIndirect Lighting Manual Clock AdjustmentSwitching preout Touch Sensor ToneS. Bass Management System Built-in Amp SettingDual Zone System Setting Crsc Clean Reception System CircuitText Scroll Auxiliary Input Display SettingBuilt-in Auxiliary input Setting CD Read SettingACDrive firmware version display Audio Preset MemorySetup Sound Control Voice IndexRecalling the sound setup registered by Audio Preset Memory Audio Preset RecallBasic Operations of remote control Loading and Replacing the batteryBasic operations TV source Dual Zone SystemTuner source Disc/USB sourceAccessories Installation Procedure Accessories/ Installation ProcedureConnecting Wires to Terminals Installation InstallationUSB Device Connection General Troubleshooting GuideDisc source Tuner sourceAudio file source USB device sourceMessages shown below display your systems condition Load Specifications Page

DPX-MP2090U specifications

The Kenwood DPX-MP2090U is a versatile and feature-rich car stereo designed to enhance your in-car audio experience. This model stands out for its blend of modern technology, user-friendly interface, and excellent sound quality, making it a popular choice among car audio enthusiasts.

One of the key features of the Kenwood DPX-MP2090U is its ability to play a variety of media formats. The stereo supports CD, MP3, WMA, and WAV playback, ensuring that all your favorite music formats can be enjoyed on the go. Additionally, it comes equipped with a USB port, which allows for effortless connection of USB drives and smartphones, enabling direct play of digital music files. This is particularly handy for users who prefer to store their music collections on portable devices.

The DPX-MP2090U also features Bluetooth connectivity, allowing for hands-free calling and wireless audio streaming. This technology provides an added layer of convenience, enabling drivers to focus on the road while still enjoying their music and staying connected. The built-in microphone ensures clear communication during calls, making it an excellent option for those who prioritize safety.

Another notable characteristic is its customizable sound settings. The audio processing capabilities include a 13-band graphic equalizer, allowing users to fine-tune their audio output according to personal preferences and vehicle acoustics. The stereo also supports high- and low-pass filters and offers adjustable bass boost options for enhanced sound dynamics.

The design of the Kenwood DPX-MP2090U is equally appealing. With a bright, easy-to-read LCD display, it provides clear visibility of song titles, artist names, and other information, even in bright sunlight. The user interface is intuitive, making navigation through menus and settings quick and easy, enhancing overall user experience.

Furthermore, the DPX-MP2090U is designed to be compatible with a range of additional features such as satellite radio and various smartphone integration options, ensuring that it remains relevant in an ever-evolving tech landscape.

In conclusion, the Kenwood DPX-MP2090U is a compelling option for anyone looking to upgrade their car audio system. Its combination of diverse playback options, Bluetooth connectivity, customizable sound settings, and user-friendly interface makes it a robust choice for enhancing your driving experience. Whether for daily commutes or long road trips, this car stereo promises to deliver excellent audio quality and convenience.
Top Page Image Contents