Kenwood DPX-MP2090U Safety precautions, To prevent injury or fire, take the following precautions

Page 3

Safety precautions

2WARNING

To prevent injury or fire, take the following precautions:

•To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.

•Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work to professionals.

2CAUTION

To prevent damage to the machine, take the following precautions:

•Make sure to ground the unit to a negative 12V DC power supply.

•Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

•Do not subject the faceplate to excessive shock, as it is a piece of precision equipment.

•When replacing a fuse, only use a new fuse with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction.

•Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.

Do Not Load 8 cm (3 in.) CDs in the CD slot

If you try to load a 8 cm (3 in.) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit.

About CD players/disc changers connected to this unit

Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players.

Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage.

Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed may differ depending on the models being connected.

•You can damage both your unit and the CD changer if you connect them incorrectly.

Lens Fogging

When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.

The "AAC" logo is trademark of Dolby

Laboratories.

English 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents DPX-MP2090U Contents Lens Fogging Safety precautionsTo prevent injury or fire, take the following precautions Do Not Load 8 cm 3 in. CDs in the CD slotCleaning the Unit How to reset your unitAuto Ensemble Memory Entry Marking of products using lasers Except for some areasAutomatic Switching DAB priority About DAB Tuner controlAbout CDs About USB device Operation About USB deviceAvailable USB devices About the Connection of the USB deviceAbout AAC, MP3 and WMA Playing order of the Audio file Selecting the Source General featuresPower VolumeAudio Control Sound setting DisplaySelect the Basic Audio item to adjust Press the VOL knob System QAudio Setup Adjusting the detail of Audio ControlSpeaker Setting Subwoofer OutputTEL Mute Audio file source Switching DisplayTuner source CD & External disc sourceTuner/TV control features TuningTuning Mode Frequency Step Setting Direct Access TuningStation Preset Memory Preset TuningDirect TV Tuning TV TuningTV channel Preset Memory Preset TV TuningCD/USB device/Audio file/External disc control features Playing CD & Audio filePlaying USB device Disc Search/Folder Search Playing External DiscFast Forwarding and Reversing Track/File SearchScan Play Direct Track/File SearchDirect Disc Search Track/File/Disc/Folder RepeatAll Random Play Select modeCancelling the All Random Play Magazine Random PlayFolder name display Displays the current folder name File Select modeFolder Select 1 mode Select the file Push the Control knob towards 4 or ¢Folder Select 2 mode Switching the Play modeCheck the name of upper level folder Selected initial group plays Cancelling the Letter SeekLetter Seek Text/Title ScrollSelect the Beep display You can continue by returning to and setting other itemsExit Menu mode Press the Menu button Menu systemTo deactivate the Security Code function Activating Security CodeDeactivating Security Code Approved is displayed Security Code function activatesIndirect Lighting Manual Clock AdjustmentSwitching preout Touch Sensor ToneS. Bass Management System Built-in Amp SettingDual Zone System Setting Crsc Clean Reception System CircuitText Scroll Auxiliary Input Display SettingBuilt-in Auxiliary input Setting CD Read SettingACDrive firmware version display Audio Preset MemorySetup Sound Control Voice IndexRecalling the sound setup registered by Audio Preset Memory Audio Preset RecallBasic Operations of remote control Loading and Replacing the batteryBasic operations TV source Dual Zone SystemTuner source Disc/USB sourceAccessories Installation Procedure Accessories/ Installation ProcedureConnecting Wires to Terminals Installation InstallationUSB Device Connection General Troubleshooting GuideDisc source Tuner sourceAudio file source USB device sourceMessages shown below display your systems condition Load Specifications Page

DPX-MP2090U specifications

The Kenwood DPX-MP2090U is a versatile and feature-rich car stereo designed to enhance your in-car audio experience. This model stands out for its blend of modern technology, user-friendly interface, and excellent sound quality, making it a popular choice among car audio enthusiasts.

One of the key features of the Kenwood DPX-MP2090U is its ability to play a variety of media formats. The stereo supports CD, MP3, WMA, and WAV playback, ensuring that all your favorite music formats can be enjoyed on the go. Additionally, it comes equipped with a USB port, which allows for effortless connection of USB drives and smartphones, enabling direct play of digital music files. This is particularly handy for users who prefer to store their music collections on portable devices.

The DPX-MP2090U also features Bluetooth connectivity, allowing for hands-free calling and wireless audio streaming. This technology provides an added layer of convenience, enabling drivers to focus on the road while still enjoying their music and staying connected. The built-in microphone ensures clear communication during calls, making it an excellent option for those who prioritize safety.

Another notable characteristic is its customizable sound settings. The audio processing capabilities include a 13-band graphic equalizer, allowing users to fine-tune their audio output according to personal preferences and vehicle acoustics. The stereo also supports high- and low-pass filters and offers adjustable bass boost options for enhanced sound dynamics.

The design of the Kenwood DPX-MP2090U is equally appealing. With a bright, easy-to-read LCD display, it provides clear visibility of song titles, artist names, and other information, even in bright sunlight. The user interface is intuitive, making navigation through menus and settings quick and easy, enhancing overall user experience.

Furthermore, the DPX-MP2090U is designed to be compatible with a range of additional features such as satellite radio and various smartphone integration options, ensuring that it remains relevant in an ever-evolving tech landscape.

In conclusion, the Kenwood DPX-MP2090U is a compelling option for anyone looking to upgrade their car audio system. Its combination of diverse playback options, Bluetooth connectivity, customizable sound settings, and user-friendly interface makes it a robust choice for enhancing your driving experience. Whether for daily commutes or long road trips, this car stereo promises to deliver excellent audio quality and convenience.
Top Page Image Contents