Kenwood DPX-MP2090U instruction manual Audio file source, USB device source

Page 39

Audio file source

?Cannot play an Audio file.

✔The media is scratched or dirty.

☞Clean the media, referring to the CD cleaning of the section on <About CDs> (page 6).

?The sound skips when an Audio file is being played.

✔The media is scratched or dirty.

☞Clean the media, referring to the CD cleaning of the section on <About CDs> (page 6).

✔The recording condition is bad.

☞Record the media again or use another media.

?The Audio file track time isn’t displayed correctly.

✔---

☞There are times when it isn’t displayed correctly according to the Audio file recording conditions.

USB device source

?The USB device is not detected.

✔The USB connector is disconnected.

☞Connect the connector of the USB device properly.

?The USB device does not play its audio files.

✔The USB connector is disconnected.

☞Connect the connector of the USB device properly.

The messages shown below display your systems condition.

EJECT:

No disc magazine has been loaded in

 

the changer. The disc magazine is not

 

completely loaded.

 

➪ Load the disc magazine properly.

 

No CD in the unit.

 

➪ Insert the CD.

NO DISC:

No disc has been loaded in the disc

 

magazine.

 

➪ Load a disc into the disc magazine.

TOC ERR:

No disc has been loaded in the disc

 

magazine.

 

➪ Load a disc into the disc magazine.

 

The CD is quite dirty. The CD is upside-

 

down. The CD is scratched a lot.

 

➪ Clean the CD and load it correctly.

READ ERR:

• The number of files or folders which are

 

stored in the connected USB device is

 

above the limitation.

 

• The file system of the connected USB

 

device is broken.

 

➪ Copy the files and folders for the USB

 

device again referring to http://www.

 

kenwood.com/usb/. If the error

 

message is still displayed, initialize the

 

USB device or use other USB devices.

E-05:

The CD is upside-down.

 

➪ Load the CD correctly.

BLANK:

Nothing has been recorded on the MD.

NO TRACK:

No tracks are recorded on the MD,

 

although it has a title.

NO PANEL:

The faceplate of the slave unit being

 

connected to this unit has been removed.

 

➪ Replace it.

E-77: The unit is malfunctioning for some reason.

➪Press the reset button on the unit. If the "E-77" code does not disappear, consult your nearest service center.

E-99: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.

➪Check the disc magazine. And then press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center.

English 39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents DPX-MP2090U Contents Lens Fogging Safety precautionsTo prevent injury or fire, take the following precautions Do Not Load 8 cm 3 in. CDs in the CD slotCleaning the Unit How to reset your unitAuto Ensemble Memory Entry Marking of products using lasers Except for some areasAutomatic Switching DAB priority About DAB Tuner controlAbout CDs About USB device Operation About USB deviceAvailable USB devices About the Connection of the USB deviceAbout AAC, MP3 and WMA Playing order of the Audio file Selecting the Source General featuresPower VolumeAudio Control Sound setting DisplaySelect the Basic Audio item to adjust Press the VOL knob System QAudio Setup Adjusting the detail of Audio ControlSpeaker Setting Subwoofer OutputTEL Mute Audio file source Switching DisplayTuner source CD & External disc sourceTuner/TV control features TuningTuning Mode Frequency Step Setting Direct Access TuningStation Preset Memory Preset TuningDirect TV Tuning TV TuningTV channel Preset Memory Preset TV TuningCD/USB device/Audio file/External disc control features Playing CD & Audio filePlaying USB device Disc Search/Folder Search Playing External DiscFast Forwarding and Reversing Track/File SearchScan Play Direct Track/File SearchDirect Disc Search Track/File/Disc/Folder RepeatAll Random Play Select modeCancelling the All Random Play Magazine Random PlayFolder name display Displays the current folder name File Select modeFolder Select 1 mode Select the file Push the Control knob towards 4 or ¢Folder Select 2 mode Switching the Play modeCheck the name of upper level folder Selected initial group plays Cancelling the Letter SeekLetter Seek Text/Title ScrollSelect the Beep display You can continue by returning to and setting other itemsExit Menu mode Press the Menu button Menu systemTo deactivate the Security Code function Activating Security CodeDeactivating Security Code Approved is displayed Security Code function activatesIndirect Lighting Manual Clock AdjustmentSwitching preout Touch Sensor ToneS. Bass Management System Built-in Amp SettingDual Zone System Setting Crsc Clean Reception System CircuitText Scroll Auxiliary Input Display SettingBuilt-in Auxiliary input Setting CD Read SettingACDrive firmware version display Audio Preset MemorySetup Sound Control Voice IndexRecalling the sound setup registered by Audio Preset Memory Audio Preset RecallBasic Operations of remote control Loading and Replacing the batteryBasic operations TV source Dual Zone SystemTuner source Disc/USB sourceAccessories Installation Procedure Accessories/ Installation ProcedureConnecting Wires to Terminals Installation InstallationUSB Device Connection General Troubleshooting GuideDisc source Tuner sourceAudio file source USB device sourceMessages shown below display your systems condition Load Specifications Page

DPX-MP2090U specifications

The Kenwood DPX-MP2090U is a versatile and feature-rich car stereo designed to enhance your in-car audio experience. This model stands out for its blend of modern technology, user-friendly interface, and excellent sound quality, making it a popular choice among car audio enthusiasts.

One of the key features of the Kenwood DPX-MP2090U is its ability to play a variety of media formats. The stereo supports CD, MP3, WMA, and WAV playback, ensuring that all your favorite music formats can be enjoyed on the go. Additionally, it comes equipped with a USB port, which allows for effortless connection of USB drives and smartphones, enabling direct play of digital music files. This is particularly handy for users who prefer to store their music collections on portable devices.

The DPX-MP2090U also features Bluetooth connectivity, allowing for hands-free calling and wireless audio streaming. This technology provides an added layer of convenience, enabling drivers to focus on the road while still enjoying their music and staying connected. The built-in microphone ensures clear communication during calls, making it an excellent option for those who prioritize safety.

Another notable characteristic is its customizable sound settings. The audio processing capabilities include a 13-band graphic equalizer, allowing users to fine-tune their audio output according to personal preferences and vehicle acoustics. The stereo also supports high- and low-pass filters and offers adjustable bass boost options for enhanced sound dynamics.

The design of the Kenwood DPX-MP2090U is equally appealing. With a bright, easy-to-read LCD display, it provides clear visibility of song titles, artist names, and other information, even in bright sunlight. The user interface is intuitive, making navigation through menus and settings quick and easy, enhancing overall user experience.

Furthermore, the DPX-MP2090U is designed to be compatible with a range of additional features such as satellite radio and various smartphone integration options, ensuring that it remains relevant in an ever-evolving tech landscape.

In conclusion, the Kenwood DPX-MP2090U is a compelling option for anyone looking to upgrade their car audio system. Its combination of diverse playback options, Bluetooth connectivity, customizable sound settings, and user-friendly interface makes it a robust choice for enhancing your driving experience. Whether for daily commutes or long road trips, this car stereo promises to deliver excellent audio quality and convenience.
Top Page Image Contents