Kenwood DPX-MP2090U instruction manual Troubleshooting Guide, General

Page 37

Troubleshooting Guide

What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.

General

?The power does not turn ON.

✔The fuse has blown.

☞After checking for short circuits in the wires, replace the fuse with one with the same rating.

?There’s a source you can’t switch.

✔There’s no media inserted.

☞Set the media you want to listen to. If there’s no media in this unit, you can’t switch to each source.

✔The Disc changer isn’t connected.

☞Connect the Disc changer. If the Disc changer isn’t connected to it’s input terminal, You can’t switch to an external disc source.

?The memory is erased when the ignition is turned OFF.

✔The ignition and battery wire are incorrectly connected.

☞Connect the wire correctly, referring to the section on <Connecting Wires to Terminals> (page 35).

?There’s no loudness effect.

✔You’re using Subwoofer preout.

☞Loudness has no effect in Subwoofer preout.

?The TEL mute function does not work.

✔The TEL mute wire is not connected properly.

☞Connect the wire correctly, referring to the section on <Connecting Wires to Terminals> (page 35).

?The TEL mute function turns ON even though the TEL mute wire is not connected.

✔The TEL mute wire is touching a metal part of the car.

☞Pull the TEL mute wire away from the metal part of the car.

?Even if Loudness is turned ON, high-pitched tone isn’t compensated for.

✔Tuner source is selected.

☞High-pitched tone isn’t compensated for when in Tuner source.

?No sound can be heard, or the volume is low.

✔The fader or balance settings are set all the way to one side.

☞Center the fader and balance settings.

✔The input/output wires or wiring harness are connected incorrectly.

☞Reconnect the input/output wires or the wiring harness correctly. See the section on <Connecting Wires to Terminals> (page 35).

✔The values of Volume offset are low.

☞Turn up the Volume offset, referring to the section on <Audio Setup> (page 12).

✔The <Built-in Amp Setting> (page 28) is OFF.

☞Turn it ON.

?The sound quality is poor or distorted.

✔One of the speaker wires is being pinched by a screw in the car.

☞Check the speaker wiring.

✔The speakers are not wired correctly.

☞Reconnect the speaker wires so that each output terminal is connected to a different speaker.

?The Touch Sensor Tone doesn’t sound.

✔The preout jack is being used.

☞The Touch Sensor Tone can’t be output from the preout jack.

✔The <Touch Sensor Tone> (page 27) is OFF.

☞Turn it ON.

?The Dimmer function does not work.

✔The Dimmer wire is not connected correctly.

☞Check the Dimmer wire connection.

✔The <Dimmer> (page 27) is OFF.

☞Turn it ON.

?The sound is not output from Subwoofer or it outputs the different sound.

✔When "2ZON" of <Audio Setup> (page12) is set to ON.

☞Set "2ZON" of <Audio Setup> to OFF.

?The display blacks out while scrolling.

✔<Display Illumination Control> is set to OFF.

☞Refer to <Display Illumination Control> (page 27).

English 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents DPX-MP2090U Contents To prevent injury or fire, take the following precautions Safety precautionsDo Not Load 8 cm 3 in. CDs in the CD slot Lens FoggingCleaning the Unit How to reset your unitAutomatic Switching DAB priority Marking of products using lasers Except for some areasAbout DAB Tuner control Auto Ensemble Memory EntryAbout CDs Available USB devices About USB deviceAbout the Connection of the USB device About USB device OperationAbout AAC, MP3 and WMA Playing order of the Audio file Power General featuresVolume Selecting the SourceSelect the Basic Audio item to adjust Press the VOL knob Sound setting DisplaySystem Q Audio ControlAudio Setup Adjusting the detail of Audio ControlSubwoofer Output Speaker SettingTEL Mute Tuner source Switching DisplayCD & External disc source Audio file sourceTuning Tuner/TV control featuresTuning Mode Station Preset Memory Direct Access TuningPreset Tuning Frequency Step SettingTV channel Preset Memory TV TuningPreset TV Tuning Direct TV TuningPlaying CD & Audio file CD/USB device/Audio file/External disc control featuresPlaying USB device Fast Forwarding and Reversing Playing External DiscTrack/File Search Disc Search/Folder SearchDirect Disc Search Direct Track/File SearchTrack/File/Disc/Folder Repeat Scan PlayCancelling the All Random Play Select modeMagazine Random Play All Random PlayFolder Select 1 mode File Select modeSelect the file Push the Control knob towards 4 or ¢ Folder name display Displays the current folder nameSwitching the Play mode Folder Select 2 modeCheck the name of upper level folder Letter Seek Cancelling the Letter SeekText/Title Scroll Selected initial group playsExit Menu mode Press the Menu button You can continue by returning to and setting other itemsMenu system Select the Beep displayDeactivating Security Code Activating Security CodeApproved is displayed Security Code function activates To deactivate the Security Code functionSwitching preout Manual Clock AdjustmentTouch Sensor Tone Indirect LightingDual Zone System Setting Built-in Amp SettingCrsc Clean Reception System Circuit S. Bass Management SystemBuilt-in Auxiliary input Setting Auxiliary Input Display SettingCD Read Setting Text ScrollSetup Sound Control Audio Preset MemoryVoice Index ACDrive firmware version displayRecalling the sound setup registered by Audio Preset Memory Audio Preset RecallLoading and Replacing the battery Basic Operations of remote controlBasic operations Tuner source Dual Zone SystemDisc/USB source TV sourceAccessories Installation Procedure Accessories/ Installation ProcedureConnecting Wires to Terminals Installation InstallationUSB Device Connection General Troubleshooting GuideDisc source Tuner sourceUSB device source Audio file sourceMessages shown below display your systems condition Load Specifications Page

DPX-MP2090U specifications

The Kenwood DPX-MP2090U is a versatile and feature-rich car stereo designed to enhance your in-car audio experience. This model stands out for its blend of modern technology, user-friendly interface, and excellent sound quality, making it a popular choice among car audio enthusiasts.

One of the key features of the Kenwood DPX-MP2090U is its ability to play a variety of media formats. The stereo supports CD, MP3, WMA, and WAV playback, ensuring that all your favorite music formats can be enjoyed on the go. Additionally, it comes equipped with a USB port, which allows for effortless connection of USB drives and smartphones, enabling direct play of digital music files. This is particularly handy for users who prefer to store their music collections on portable devices.

The DPX-MP2090U also features Bluetooth connectivity, allowing for hands-free calling and wireless audio streaming. This technology provides an added layer of convenience, enabling drivers to focus on the road while still enjoying their music and staying connected. The built-in microphone ensures clear communication during calls, making it an excellent option for those who prioritize safety.

Another notable characteristic is its customizable sound settings. The audio processing capabilities include a 13-band graphic equalizer, allowing users to fine-tune their audio output according to personal preferences and vehicle acoustics. The stereo also supports high- and low-pass filters and offers adjustable bass boost options for enhanced sound dynamics.

The design of the Kenwood DPX-MP2090U is equally appealing. With a bright, easy-to-read LCD display, it provides clear visibility of song titles, artist names, and other information, even in bright sunlight. The user interface is intuitive, making navigation through menus and settings quick and easy, enhancing overall user experience.

Furthermore, the DPX-MP2090U is designed to be compatible with a range of additional features such as satellite radio and various smartphone integration options, ensuring that it remains relevant in an ever-evolving tech landscape.

In conclusion, the Kenwood DPX-MP2090U is a compelling option for anyone looking to upgrade their car audio system. Its combination of diverse playback options, Bluetooth connectivity, customizable sound settings, and user-friendly interface makes it a robust choice for enhancing your driving experience. Whether for daily commutes or long road trips, this car stereo promises to deliver excellent audio quality and convenience.
Top Page Image Contents