Kenwood DPX-MP2090U instruction manual Available USB devices, About USB device Operation

Page 7

About USB device

Notes on Use of the USB device

This unit can play audio files stored in the flash memory and digital audio player that have a USB port (these devices are referred to as USB devices in this document).

The following restrictions are placed on the types and usage of available USB devices:

Available USB devices

•USB devices belonging to the USB mass storage class.

•USB devices whose maximum current consumption is 500 mA or less.

For the supported formats and USB device types, refer to http://www.kenwood.com/usb/.

•USB Mass Storage Class:

USB devices that the PC can recognize as an external storage without using any special driver or application software.

•Contact the sales agent as to whether your USB device conforms to the USB mass storage class specs.

•Using an unsupported USB device can result in abnormal playback or display of the audio file.

Even if you use the USB device conforming to the above specs, audio files cannot be played normally depending on the type or condition of the USB device.

About the Connection of the USB device

•Do not directly connect the USB device to the USB connector on the panel. Connect it using a cable.

•When connecting the USB drive, usage of the supplied USB cable is recommended.

Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback.

•You cannot connect a USB device via a USB hub.

•Install the USB device in the place where it will not prevent you from driving your vehicle properly.

•Do not leave the USB device in the vehicle for a long time. It can deform or damage due to direct sunlight, high temperature, etc.

•Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device.

We shall have no compensation for any damage arising out of erasure of the stored data.

•Leave the cap on when not using an USB device.

About USB device Operation

•USB device operation is the same as audio file operation unless otherwise some notice is indicated.

•USB source is recognized as CD source on the connected unit.

English 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DPX-MP2090U Contents Lens Fogging Safety precautionsTo prevent injury or fire, take the following precautions Do Not Load 8 cm 3 in. CDs in the CD slotCleaning the Unit How to reset your unitAuto Ensemble Memory Entry Marking of products using lasers Except for some areasAutomatic Switching DAB priority About DAB Tuner controlAbout CDs About USB device Operation About USB deviceAvailable USB devices About the Connection of the USB deviceAbout AAC, MP3 and WMA Playing order of the Audio file Selecting the Source General featuresPower VolumeAudio Control Sound setting DisplaySelect the Basic Audio item to adjust Press the VOL knob System QAudio Setup Adjusting the detail of Audio ControlSubwoofer Output Speaker SettingTEL Mute Audio file source Switching DisplayTuner source CD & External disc sourceTuning Tuner/TV control featuresTuning Mode Frequency Step Setting Direct Access TuningStation Preset Memory Preset TuningDirect TV Tuning TV TuningTV channel Preset Memory Preset TV TuningPlaying CD & Audio file CD/USB device/Audio file/External disc control featuresPlaying USB device Disc Search/Folder Search Playing External DiscFast Forwarding and Reversing Track/File SearchScan Play Direct Track/File SearchDirect Disc Search Track/File/Disc/Folder RepeatAll Random Play Select modeCancelling the All Random Play Magazine Random PlayFolder name display Displays the current folder name File Select modeFolder Select 1 mode Select the file Push the Control knob towards 4 or ¢Switching the Play mode Folder Select 2 modeCheck the name of upper level folder Selected initial group plays Cancelling the Letter SeekLetter Seek Text/Title ScrollSelect the Beep display You can continue by returning to and setting other itemsExit Menu mode Press the Menu button Menu systemTo deactivate the Security Code function Activating Security CodeDeactivating Security Code Approved is displayed Security Code function activatesIndirect Lighting Manual Clock AdjustmentSwitching preout Touch Sensor ToneS. Bass Management System Built-in Amp SettingDual Zone System Setting Crsc Clean Reception System CircuitText Scroll Auxiliary Input Display SettingBuilt-in Auxiliary input Setting CD Read SettingACDrive firmware version display Audio Preset MemorySetup Sound Control Voice IndexRecalling the sound setup registered by Audio Preset Memory Audio Preset RecallLoading and Replacing the battery Basic Operations of remote controlBasic operations TV source Dual Zone SystemTuner source Disc/USB sourceAccessories Installation Procedure Accessories/ Installation ProcedureConnecting Wires to Terminals Installation InstallationUSB Device Connection General Troubleshooting GuideDisc source Tuner sourceUSB device source Audio file sourceMessages shown below display your systems condition Load Specifications Page

DPX-MP2090U specifications

The Kenwood DPX-MP2090U is a versatile and feature-rich car stereo designed to enhance your in-car audio experience. This model stands out for its blend of modern technology, user-friendly interface, and excellent sound quality, making it a popular choice among car audio enthusiasts.

One of the key features of the Kenwood DPX-MP2090U is its ability to play a variety of media formats. The stereo supports CD, MP3, WMA, and WAV playback, ensuring that all your favorite music formats can be enjoyed on the go. Additionally, it comes equipped with a USB port, which allows for effortless connection of USB drives and smartphones, enabling direct play of digital music files. This is particularly handy for users who prefer to store their music collections on portable devices.

The DPX-MP2090U also features Bluetooth connectivity, allowing for hands-free calling and wireless audio streaming. This technology provides an added layer of convenience, enabling drivers to focus on the road while still enjoying their music and staying connected. The built-in microphone ensures clear communication during calls, making it an excellent option for those who prioritize safety.

Another notable characteristic is its customizable sound settings. The audio processing capabilities include a 13-band graphic equalizer, allowing users to fine-tune their audio output according to personal preferences and vehicle acoustics. The stereo also supports high- and low-pass filters and offers adjustable bass boost options for enhanced sound dynamics.

The design of the Kenwood DPX-MP2090U is equally appealing. With a bright, easy-to-read LCD display, it provides clear visibility of song titles, artist names, and other information, even in bright sunlight. The user interface is intuitive, making navigation through menus and settings quick and easy, enhancing overall user experience.

Furthermore, the DPX-MP2090U is designed to be compatible with a range of additional features such as satellite radio and various smartphone integration options, ensuring that it remains relevant in an ever-evolving tech landscape.

In conclusion, the Kenwood DPX-MP2090U is a compelling option for anyone looking to upgrade their car audio system. Its combination of diverse playback options, Bluetooth connectivity, customizable sound settings, and user-friendly interface makes it a robust choice for enhancing your driving experience. Whether for daily commutes or long road trips, this car stereo promises to deliver excellent audio quality and convenience.
Top Page Image Contents