Alpine MRP-M1000, MRP-M500 owner manual Covers

Page 5

English

 

Français

 

Español

ATTACHING THE TERMINAL

FIXATION DES

FIJACIÓN DE LAS TAPAS DEL

COVERS

CACHE-BORNES

TERMINAL

Attach the terminal covers (supplied) after connections and confirmation of correct operation.

Attaching the terminal covers will improve the appear- ance of the unit.

How to attach the terminal covers:

Attach the left and right terminal covers using the sup- plied screws (M3 x 12), as shown in the figure below.

1 Right terminal cover

2 Left terminal cover

3 Screw (M3 x 12)

NOTE:

Do not lift or carry the unit by the attached terminal covers.

Fixez les cache-bornes (fournis) après avoir vérifié que les raccordements ont été correctement effectués et que l’appareil fonctionne correctement.

La fixation des cache-bornes améliore l’aspect de l’ap- pareil.

Comment fixer les cache-bornes:

Fixez les cache-bornes gauche et droit à l’aide des vis (M3 x 12) fournies, comme indiqué dans le schéma ci- dessous.

1Cache-bornes droit

2Cache-bornes gauche

3Vis (M3 x 12)

REMARQUE :

Ne transportez pas et ne soulevez pas l’unité par les cache-bornes.

Fije las tapas del terminal (suministradas) tras realizar las conexiones y confirmar que la unidad funciona correctamente.

La fijación de las tapas del terminal mejorará la apariencia de la unidad.

Cómo fijar las tapas del terminal:

Fije las tapas izquierda y derecha del terminal con los tornillos (M3 x 12) suministrados, tal como se indica en la siguiente figura.

1 Tapa derecha del terminal

2 Tapa izquierda del terminal

3 Tornillo (M3 x 12)

NOTA:

No eleve ni transporte la unidad cogiéndola de las tapas del terminal.

3

1

3

Fig. 2

2

5

ALPINE MRP-M500 68-10872Z21-A (EN/FR/ES)

Image 5
Contents Alpine MRP-M500 68-10872Z21-A EN/FR/ES ContentsÍndice Advertencia AvertissementPrudencia Self-Tapping Screws M4 x Ground Lead Chassis Holes Installation InstalaciónRemarque NotaCovers Conducteur jaune de la batterie provenant de Connections ConnexionsDe fusibles To prevent external noise from entering the audio systemNotas RemarquesSi vous utilisez le fil d’entrée de haut-parleur Remarque NotaLorsque l’appareil est mis hors tension, quelque Bruit peut être produit, selon l’unité principaleVérifier le calibre des fils If the wire gauge used is unknown, ask your dealerLe calibre des fils recommandés pour l’appareil est 21mm2 Connexions DE Conexiones Filter Faible puissance lorsqu’une seule sortie est utilisée System DIAGRAMS/DIAGRAMMES DU SYSTÈME/DIAGRAMAS DEL Sistema+ Haut-parleur de sous-graves + Altavoz de frecuencias ultrabajasOtro amplificador Other AMPAutre amplificateur Service Care Soins Pratiques Specifications SpécificationsImportant Notice Avis ImportantAlpine MRP-M500 68-10872Z21-A EN/FR/ES Alpine MRP-M500 68-10872Z21-A EN/FR/ES

MRP-M1000, MRP-M500 specifications

The Alpine MRP-M1000 and MRP-M500 are powerful monoblock amplifiers designed to enhance the audio experience in automotive sound systems. Built with Alpine's commitment to sound quality and performance, both models offer a range of features that cater to audiophiles and casual listeners alike.

The MRP-M1000 is a high-performance amplifier that delivers a substantial 1000 watts of RMS power output, providing ample power for larger subwoofers and ensuring that low-end frequencies are reproduced cleanly and with authority. Its Class D architecture maximizes efficiency, allowing for reduced heat generation and improved performance over extended use. The amplifier is equipped with a variable low-pass filter, allowing users to adjust the crossover frequency to seamlessly integrate their subwoofer with the rest of their audio setup.

On the other hand, the MRP-M500 offers a solid 500 watts of RMS power, making it an excellent choice for those who want impactful bass without overwhelming their system. This compact amplifier combines efficiency and power, making it suitable for smaller setups or as a dedicated amplifier for a single subwoofer. Like the MRP-M1000, the MRP-M500 also features a variable low-pass filter, ensuring a tailored audio experience.

Both amplifiers utilize Alpineā€™s Circuit Topology, which minimizes distortion and enhances sound quality. This technology helps deliver a clean signal to the connected speakers or subwoofers, ensuring that every note is crisp and clear. The amplifiers are also equipped with adjustable gain controls, allowing users to easily match the output level to their source unit for optimal performance.

Durability is another hallmark of the MRP series, with both amplifiers featuring a robust design that can withstand the rigors of automotive environments. They come equipped with built-in thermal protection, which prevents overheating and ensures reliable performance. Additionally, the amplifiers include multiple speaker-level inputs, enabling them to be integrated into systems without preamp outputs.

In summary, the Alpine MRP-M1000 and MRP-M500 offer exceptional audio fidelity, efficient power delivery, and versatile installation options. With their class-leading technologies and user-friendly features, these amplifiers are tailored for anyone looking to elevate their sound experience on the road. Whether you are a seasoned audiophile or simply want to enjoy immersive sound in your vehicle, these amplifiers provide the performance needed to achieve high-quality audio without compromise.