Kenwood KVT-911DVD instruction manual Removing Monitor Unit, Removing the Hard Rubber Frame

Page 63

Removing Monitor Unit

■Removing the Hard Rubber Frame

1Engage the catch pins on the removal tool and remove the two locks on the lower level.

Lower the frame and pull it forward as shown in the figure.

2When the lower level is removed, remove the upper two locations.

NOTE

The frame can be removed from the top side in the same manner.

Lock Catch

Accessory J

■Removing the Unit

1 Refer to the section “Removing the Hard Rubber Frame” and then	Catch facing up
remove the hard rubber frame.

2 Remove the Hex-head screw with integral washer (M4×6) on the back panel.

3Insert the two removal tools deeply into the slots on each side, as

shown.

4Lower the removal tool toward the bottom, and pull out the unit

halfway while pressing towards the inside.

2CAUTION

Be careful to avoid injury from the catch pins on the removal tool.

5 Pull the unit all the way out with your hands, being careful not to drop it.

Image 63

Contents KVT-911DVD Contents Name Set Function FCC Warning Before UseCleaning the disc slot 169 LB Icon DescriptionGlossary Opening/Closing the Monitor Power OffSwitching the Monitor’s Picture Monitor Control FunctionAdjusting the Volume Selecting the TV/Video Screen ModeAdjusting the Picture Quality/ Slide Position Switching the AV OutputMenu Function Setup Menu Function System Setup Function SettingScreen tthe Information on the Graphic Setting the Auto Scroll Display FunctionSetting the On Screen Display Function Switching to the Sensor Box ScreenSet the time manually if the automatic time Clock Adjustment FunctionAdjusting the Time Manually Data sent from RDS stations after receivingPage DVD,VCD Setup Function Setting the Priority Language for MenuSetting the Angle Mark Display PBCPlayback Control Function On/Off for VCD version Setting the Optical Output ModeSwitching to the Rating Level parental lock Setting Screen Screen Mode 43 LB 43 PS 169Audio language only Returning to the DVD setup ScreenInputing the Language Code Returning to the Original LanguageLanguage List of language codesSetting the Parental Level Setting the passwordAdjusting the Touch Position Touch Panel Adjustment FunctionBattery Using the Security SystemCanceling the Security Code Screen If you press the Reset button or removeOperating the Buttons for Basic Function Basic Operation for Source Control Screen Displaying the Information Selecting the Preset BandsDisplaying the TV Picture Selecting the ChannelsTV Control Function Switching the List Recalling a Preset channelReturning to the Source Control Screen FM/AM Tuner Control Function Selecting the FM Bands Station Preset MemoryTuning Switching to the PTY Search ScreenSwitching the Snps and PS Name Switching to the FM/AM List ScreenSwitching the Band List Switching Display for Radio TextPresetting the Volume for Traffic Information Turning TI function On/OffSeeking to a Different Traffic Information Station You can register a station as a program type Select the type of program to be receivedRegistration of a station as a PTY Searching the Selected Program TypeDVD/VCD Control Function on the Pictures Track Search Viewing ZoomDisplaying the VCD Picture Next Play/ Previous PlayDVD/VCD/CD Control Function Pausing and Restarting Disc Play Track Scan Function Track Repeat FunctionTrack Random Play Function Selecting the Name or Title Display for Discs To Scroll ManuallySelecting the Time Display External Disc Control Function Making a Forward Track SearchMaking a Reverse Track Search Disc Repeat Function Magazine Random Play FunctionSelecting the Time Display for CDs Selecting the Disc Switching to the Disc List ScreenSwitching the Display for Discs Changing the Disc ListName Set Function Station Name Preset Snps /Disc Name Preset DnpsWeather Band Tuner Control Screen Setting the MenuReturning to the System setup Screen Other Source Control FunctionGraphic Screen Function Sound Effect Menu Function Audio Control Function Adjusting the Bass Quality Factor Switching to the Sound Preset ScreenRecalling the Kenwood Preset Sound Adjusting the Center Frequency of the BassReturning to the Sound Effect Menu Screen Adjusting the High-pass filter for Rear outputAdjusting the High-pass filter for Front output Setting the phase for Non-Fading outputChannels Surround Processor Control Function Setting the Room Size Mode Selecting the Position ModeAdjusting the Front Right Speaker Setting the Channel BalanceTest Signal Adjusting the Front Left SpeakerAdjustingoutput the High-pass filter for Center Setting the phase for Sub Woofer outputStoring Your Settings of the Crossover network/Delay time Switching to the Delay Time Setting ScreenDelay Time Setting Screen Adjusting the Sub WooferAdjusting the Gain Selecting the Adjust BandAdjusting the Center Frequency Adjusting the Quality FactorRecalling Your Sound Settings Recalling Your Settings of the Crossover Network/Delay timeTV Control Function TV position Remote Control FunctionBasic Source Control Function Monitor Control Function TV or AUD positionExternal Disc Control Function AUD position DVD/VCD/CD Control Function DVD positionAccessories InstallationInstallation Procedure Using the Relay Connector Accessory GMonitor unit ConnectionFront side Connection for Disc Changer and Disc Player Connection for AV EquipmentsExample When two CD/MD changers are interconnectedInstallation for Receiver unit Installation for Monitor UnitRemoving the Hard Rubber Frame Removing Monitor UnitConnect the antenna cable to receiver unit Installing the Antenna UnitsProblem Possible Cause Solution Troubleshooting GuideExternal disc control mode BUS-E50 BUS-E11 DVD Player Section Specifications