5.1 Channels Surround Processor Control Function
Parametric Equalizer Screen
A1 | A | 2 | A | 3 | A |
| 4 |
| |||||||
|
|
|
|
|
|
|
|
B
C
D
E | F | G | H |
ASelecting the Adjust Band
Touch the each box to select the band.
BAdjusting the Center Frequency
•Each time you touch [ 
], the frequency is increased.
•Each time you touch [ 
] , the frequency is decreased.
A1: 60Hz/ 80Hz/ 100Hz/ 120Hz/ 160Hz/ 200Hz/ 250Hz
A2: 315Hz/ 400Hz/ 500Hz/ 630Hz/ 800Hz/ 1kHz
A3: 1.25kHz/ 1.6kHz/ 2kHz/ 2.5kHz/ 3.15kHz/ 4kHz
A4: 5kHz/ 6.3kHz/ 8kHz/ 10kHz/ 12.5kHz/ 16kHz
CAdjusting the Quality Factor
Each time you touch [ 
] or [ 
] to switch the Bass quality factor as follows:
1(0.25) / 2(0.5)/ 3(1.0) /4(2.0)
FRecalling the Kenwood Preset Sound
Each time you touch [ 2 ] or [ 3 ] , the preset sound setting switches between the “FLAT“, “POPS“(TOP40), “ROCK“, “DANCE“, “VOCAL“ and “CLASSIC“.
GStoring Your Sound Settings
Touch a [ 1 ] - [ 3 ] that you want to use for the equalizer curve for at least two seconds.
Recalling Your Sound Settings
Touch a [ 1 ] - [ 3 ] for the desired equalizer curve.
HReturning to the Sound Effect Menu Screen
Touch [ RTN ] to return to the sound effect menu screen.
DAdjusting the Gain
•Each time you touch [ 
], the gain is increased.
•Each time you touch [ 
], the gain is decreased.
ESetting the Speaker Type
Using this function to set the diameter of the speaker optimizes the sound quality to the speaker diameter.
Each time you touch [ 2 ] or [ 3 ] to switch the speaker type as follows:
" STANDARD "
Speaker with a general diameter
" NARROW "
Speaker with small diameter
" WIDE "
Woofer with a large diameter
" MIDDLE "
Woofer with a small diameter
52