Kenwood KVT-911DVD Installing the Antenna Units, Connect the antenna cable to receiver unit

Page 64

Installation

Installing the Antenna Units

•Attach the antenna to the inner glass surface of the rear window using double-sided tape. Carefully check the installation location as the tape can only be stuck on once.

•If the surface temperature of the glass of the rear window is low, warm it by turning on the power of the rear defogger. A cold window glass surface will weaken the adhesive strength of the double-sided tape.

Also, if installation inside the cabin is performed on a day with high humidity or when it is raining, the high humidity level will weaken the adhesive strength of the double-sided tape.

•Do not install the antenna in a location where it may obstruct the field of view during driving, such as on the windshield.

1Check the location where the antenna is to be attached.Clean off any grease or dirt from the installation location using the supplied glass cleaner (Accessory Q), clean the area with water and allow to dry.

2CAUTION

Clean the glass thoroughly as failure to clean the glass can not only weaken the adhesive strength of the double-sided tape, but may also cause it to come loose.

2Remove the protective strips from the antenna parts and the back of the antenna unit.

3Attach the double-sided tape of the antenna parts and the antenna unit to the rear windshield glass. Attach the double- sided tape by firmly pressing down from the top. Secure cables using the supplied clampers.

4After attaching the antenna with the double-sided tape, allow it to sit undisturbed for 24 hours. Take care not to apply force to the antenna or allow it to get wet during this time.

5Connect the antenna cable to receiver unit.

Antenna parts

Antenna unit

Bundle cables with the	Rear window
clamper bar
clamper bar

(Accessory R)

Rear seat

64

Image 64

Contents KVT-911DVD Contents Name Set Function Before Use FCC WarningCleaning the disc slot Icon Description 169 LBGlossary Power Off Switching the Monitor’s PictureMonitor Control Function Opening/Closing the MonitorSelecting the TV/Video Screen Mode Adjusting the Picture Quality/ Slide PositionSwitching the AV Output Adjusting the VolumeMenu Function Setup Menu Function System Setup Function Setting the Auto Scroll Display Function Setting the On Screen Display FunctionSwitching to the Sensor Box Screen SettingScreen tthe Information on the GraphicClock Adjustment Function Adjusting the Time ManuallyData sent from RDS stations after receiving Set the time manually if the automatic timePage Setting the Priority Language for Menu DVD,VCD Setup FunctionSetting the Angle Mark Display Setting the Optical Output Mode Switching to the Rating Level parental lock Setting ScreenScreen Mode 43 LB 43 PS 169 PBCPlayback Control Function On/Off for VCD versionReturning to the DVD setup Screen Inputing the Language CodeReturning to the Original Language Audio language onlyList of language codes LanguageSetting the password Setting the Parental LevelTouch Panel Adjustment Function Adjusting the Touch PositionUsing the Security System Canceling the Security Code ScreenIf you press the Reset button or remove BatteryOperating the Buttons for Basic Function Basic Operation for Source Control Screen Selecting the Preset Bands Displaying the TV PictureSelecting the Channels Displaying the InformationTV Control Function Recalling a Preset channel Switching the ListReturning to the Source Control Screen Selecting the FM Bands Station Preset Memory TuningSwitching to the PTY Search Screen FM/AM Tuner Control FunctionSwitching to the FM/AM List Screen Switching the Band ListSwitching Display for Radio Text Switching the Snps and PS NameTurning TI function On/Off Presetting the Volume for Traffic InformationSeeking to a Different Traffic Information Station Select the type of program to be received Registration of a station as a PTYSearching the Selected Program Type You can register a station as a program typeDVD/VCD Control Function on the Pictures Viewing Zoom Displaying the VCD PictureNext Play/ Previous Play Track SearchDVD/VCD/CD Control Function Track Repeat Function Pausing and Restarting Disc Play Track Scan FunctionTrack Random Play Function To Scroll Manually Selecting the Name or Title Display for DiscsSelecting the Time Display Making a Forward Track Search External Disc Control FunctionMaking a Reverse Track Search Magazine Random Play Function Disc Repeat FunctionSelecting the Time Display for CDs Switching to the Disc List Screen Switching the Display for DiscsChanging the Disc List Selecting the DiscStation Name Preset Snps /Disc Name Preset Dnps Name Set FunctionSetting the Menu Returning to the System setup ScreenOther Source Control Function Weather Band Tuner Control ScreenGraphic Screen Function Sound Effect Menu Function Audio Control Function Switching to the Sound Preset Screen Recalling the Kenwood Preset SoundAdjusting the Center Frequency of the Bass Adjusting the Bass Quality FactorAdjusting the High-pass filter for Rear output Adjusting the High-pass filter for Front outputSetting the phase for Non-Fading output Returning to the Sound Effect Menu ScreenChannels Surround Processor Control Function Selecting the Position Mode Setting the Room Size ModeSetting the Channel Balance Test SignalAdjusting the Front Left Speaker Adjusting the Front Right SpeakerSetting the phase for Sub Woofer output Storing Your Settings of the Crossover network/Delay timeSwitching to the Delay Time Setting Screen Adjustingoutput the High-pass filter for CenterAdjusting the Sub Woofer Delay Time Setting ScreenSelecting the Adjust Band Adjusting the Center FrequencyAdjusting the Quality Factor Adjusting the GainRecalling Your Settings of the Crossover Network/Delay time Recalling Your Sound SettingsRemote Control Function Basic Source Control FunctionMonitor Control Function TV or AUD position TV Control Function TV positionDVD/VCD/CD Control Function DVD position External Disc Control Function AUD positionInstallation AccessoriesUsing the Relay Connector Accessory G Installation ProcedureConnection Monitor unitFront side Connection for AV Equipments Connection for Disc Changer and Disc PlayerWhen two CD/MD changers are interconnected ExampleInstallation for Monitor Unit Installation for Receiver unitRemoving Monitor Unit Removing the Hard Rubber FrameInstalling the Antenna Units Connect the antenna cable to receiver unitTroubleshooting Guide Problem Possible Cause SolutionExternal disc control mode BUS-E50 BUS-E11 Specifications DVD Player Section