Kenwood KVT-911DVD instruction manual Specifications, DVD Player Section

Page 68

Specifications

Specifications subject to change without notice. Monitor Section

Picture size

6.5 inches wide

 

142.6(W) × 80.7(H) mm

Display system

Transparent TN LCD panel

Drive system

TFT active matrix system

Number of pixels 336.960 pixels (480 H × 234 V × RGB)

Effective pixels

99.99%

Pixel arrangement

RGB striped arrangement

Back lighting

Cold cathode tube

DVD Player Section

D/A conversion

1 Bit

Wow and flutter

Below measurable limit

Frequency response

 

 

(Sampling frequency; 96 kHz)

20 Hz ~ 44 kHz

(Sampling frequency; 48 kHz)

20 Hz ~ 22 kHz

(Sampling frequency; 44.1 kHz)

20 Hz ~ 20 kHz

Total harmonic distortion

......................

0.003 % (1 kHz)

Signal to noise ratio

115 dB

Dynamic range

95 dB

Playable disc

DVD-VIDEO/VIDEO-CD/CD-DA

Sampling......................................frequency

8 fs(44.1, 48 kHz)/4 fs(96 kHz)

 

Optical out format

Dolby Digital/DTS/LinearPCM

FM Tuner Section

Frequency range (200 kHz space)

 

..................................................87.9 MHz – 107.9 MHz

Usable......................................................sensitivity (S/N = 30dB)

9.3dBf (0.8 µV/75 Ω)

Quieting Sensitivity (S/N = 50dB)

15.2dBf (1.6 µV/75 Ω)

....................................................

Frequency response (±3.0 dB)

30 Hz – 15 kHz

Signal to Noise ratio (MONO)

70 dB

Selectivity (±400 kHz)

≥ 80 dB

Stereo separation (1 kHz)

40 dB

AM Tuner Section

Frequency range (10 kHz space) ....

530 kHz – 1700 kHz

Usable sensitivity

28 dBµ (25 µV)

TV Tuner Section

Color system

NTSC/PAL

Television system

M

Channel converge

2-13 ch(VHF)/14-69 ch(UHF)

Channel selection system

 

................................

PLL frequency synthesizer system

Demodulation system

Split carrier system

Antenna input

4-ch diversity (75 Ω /3.5 ø minijack)

External video input level

1 Vp-p/75

External audio input level

1 V/22 KΩ

Analog RGB input

1 V/22 KΩ

Audio section

Maximum output power

..................................

45 W x 4

Full........................................................................bandwidth power (at less than 1% THD)

22 W x 4

 

 

Preout level / Load

4500mV/10kΩ (disc)

Preout impedance

≤ 600 Ω

Tone action

 

 

Bass:

100

Hz ±10 dB

Treble:

10 kHz ±10 dB

General

Operating voltage

14.4 V DC (11 to 16 V)

Consumed current

10 A

Operational temperature range

..............–10°C to +60°C

Storage temperature range

–20°C to +85°C

Size

 

 

(Monitor unit)

180(W) × 50(H) × 185(D) mm

7-1/16(W) × 1-15/16(H) × 5/16(D) inch

Installation size(Monitor unit)

 

........................................

178(W) × 50(H) × 165(D) mm

 

7(W) × 1-15/16(H) × 6-1/2(D) inch

(Receiver unit)

225(W) × 40(H) × 168(D) mm

Mass

8×7/8(W) × 1-9/16(H) × 6-5/8(D) inch

 

 

(Monitor unit)

2.0 kg(4.4 LBS)

(Receiver unit)

1.4 kg(3.0 LBS)

TV Antenna Unit

Output impedance

..........................75 Ω /3.5 ø miniplug

Operating voltage

..................................................12 V

Consumed current

................................................1.0 A

Cable length

5 m

Size

50(W) × 14.5(H) × 500(D) mm

1-15/16(W) × 9/16(H) × 19-11/16(D) inch

Mass

300 g (0.7 LBS) (x2)

Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light incorrectly.

Image 68
Contents KVT-911DVD Contents Name Set Function Before Use FCC WarningCleaning the disc slot Icon Description 169 LBGlossary Power Off Switching the Monitor’s PictureMonitor Control Function Opening/Closing the MonitorSelecting the TV/Video Screen Mode Adjusting the Picture Quality/ Slide PositionSwitching the AV Output Adjusting the VolumeMenu Function Setup Menu Function System Setup Function Setting the Auto Scroll Display Function Setting the On Screen Display FunctionSwitching to the Sensor Box Screen SettingScreen tthe Information on the GraphicClock Adjustment Function Adjusting the Time ManuallyData sent from RDS stations after receiving Set the time manually if the automatic timePage Setting the Angle Mark Display DVD,VCD Setup FunctionSetting the Priority Language for Menu Setting the Optical Output Mode Switching to the Rating Level parental lock Setting ScreenScreen Mode 43 LB 43 PS 169 PBCPlayback Control Function On/Off for VCD versionReturning to the DVD setup Screen Inputing the Language CodeReturning to the Original Language Audio language onlyList of language codes LanguageSetting the password Setting the Parental LevelTouch Panel Adjustment Function Adjusting the Touch PositionUsing the Security System Canceling the Security Code ScreenIf you press the Reset button or remove BatteryOperating the Buttons for Basic Function Basic Operation for Source Control Screen Selecting the Preset Bands Displaying the TV PictureSelecting the Channels Displaying the InformationTV Control Function Returning to the Source Control Screen Switching the ListRecalling a Preset channel Selecting the FM Bands Station Preset Memory TuningSwitching to the PTY Search Screen FM/AM Tuner Control FunctionSwitching to the FM/AM List Screen Switching the Band ListSwitching Display for Radio Text Switching the Snps and PS NameSeeking to a Different Traffic Information Station Presetting the Volume for Traffic InformationTurning TI function On/Off Select the type of program to be received Registration of a station as a PTYSearching the Selected Program Type You can register a station as a program typeDVD/VCD Control Function on the Pictures Viewing Zoom Displaying the VCD PictureNext Play/ Previous Play Track SearchDVD/VCD/CD Control Function Track Random Play Function Pausing and Restarting Disc Play Track Scan FunctionTrack Repeat Function Selecting the Time Display Selecting the Name or Title Display for DiscsTo Scroll Manually Making a Reverse Track Search External Disc Control FunctionMaking a Forward Track Search Selecting the Time Display for CDs Disc Repeat FunctionMagazine Random Play Function Switching to the Disc List Screen Switching the Display for DiscsChanging the Disc List Selecting the DiscStation Name Preset Snps /Disc Name Preset Dnps Name Set FunctionSetting the Menu Returning to the System setup ScreenOther Source Control Function Weather Band Tuner Control ScreenGraphic Screen Function Sound Effect Menu Function Audio Control Function Switching to the Sound Preset Screen Recalling the Kenwood Preset SoundAdjusting the Center Frequency of the Bass Adjusting the Bass Quality FactorAdjusting the High-pass filter for Rear output Adjusting the High-pass filter for Front outputSetting the phase for Non-Fading output Returning to the Sound Effect Menu ScreenChannels Surround Processor Control Function Selecting the Position Mode Setting the Room Size ModeSetting the Channel Balance Test SignalAdjusting the Front Left Speaker Adjusting the Front Right SpeakerSetting the phase for Sub Woofer output Storing Your Settings of the Crossover network/Delay timeSwitching to the Delay Time Setting Screen Adjustingoutput the High-pass filter for CenterAdjusting the Sub Woofer Delay Time Setting ScreenSelecting the Adjust Band Adjusting the Center FrequencyAdjusting the Quality Factor Adjusting the GainRecalling Your Settings of the Crossover Network/Delay time Recalling Your Sound SettingsRemote Control Function Basic Source Control FunctionMonitor Control Function TV or AUD position TV Control Function TV positionDVD/VCD/CD Control Function DVD position External Disc Control Function AUD positionInstallation AccessoriesUsing the Relay Connector Accessory G Installation ProcedureConnection Monitor unitFront side Connection for AV Equipments Connection for Disc Changer and Disc PlayerWhen two CD/MD changers are interconnected ExampleInstallation for Monitor Unit Installation for Receiver unitRemoving Monitor Unit Removing the Hard Rubber FrameInstalling the Antenna Units Connect the antenna cable to receiver unitTroubleshooting Guide Problem Possible Cause SolutionExternal disc control mode BUS-E50 BUS-E11 Specifications DVD Player Section