Front Panel Description
1ON/OFF
Switch the set on/off by turning the knob.
If “Cod” appears on the display, read the chapter
Volume control: By turning the knob
SCAN (search operation):
During radio reception, the stations are briefly sampled by pressing the knob for approx. one second.
Balance:
Pull knob and adjust left/right volume by turning the knob.
2
/
rocker switch
Radio: Automatical station tuning
Coding: Read first the
: Press rocker switch to confirm your code entry.
3<< / >> rocker switch
For fine tuning of the stations
4 
Ejection of the tape Press button firmly.
5Cassette compartment
6Track indication
- side A or 1 is played
- side B or 2 is played (reverse ope- ration)
7FR button (Fast Rewind) Fast rewind of the tape. Deactivate: press button FF.
8PROG (Autoreverse)
For shifting to the other side of the tape - press both buttons.
9FF button (Fast Forward) Fast forward of the tape Deactivate: press button FR.
:Display for
frequency waveband
preset button storage level
stereo
seek tuning (sensitivity)
;Preset buttons 1, 2, 3, 4, 5, 6
Store station - Keep button depressed during radio operation until the station becomes audible again.
Recall station - Briefly press the re- spective button.
Coding - Read the
Buttons 1 - 4: Use to enter a
Press each of the buttons until the four- digit code to be found in the car radio passport is represented on the display.
<lo rocker switch
Use this button to alter the sensitivity of the automatic station seek operation. lo lights up on the display - normal sen- sitivity
lo does not light up - high sensitivity
Additional function of the lo rocker switch:
Switching from stereo to mono: Press longer than 2 seconds.
13
DEUTSCH
ENGLISH |
PORTUGUES ESPAGÑOL SVENSKA NEDERLAND ITALIANO FRANÇAIS