Verona CR 43 manual FAD Fader front/rear volume adjust using the lever

Page 4

=M•L rocker switch (Medium wave - Long wave)

Use this rocker switch to select either medium wave (MW) or long wave (LW) frequencies. To switch between these wavebands simply press the rocker switch again.

>FM•T button (Frequency Modulation) This button is used for shifting between the different FM storage levels I, II, III and T (Travelstore - i.e. storing and calling the six strongest stations of an area).

Storing “T” - Press the FM •T button until the seek tuning indication starts to be displayed.

Recalling “T” - Press the FM•T button ? until T is indicated on the display. Then briefly press the respective preset button.“Balance” knob

To adjust the volume of the left and right channel

?PS rocker switch (Preset Station Scan) Pressing this button briefly samples all memorized stations of the selected waveband (FM, MW, LW or TS).

@TREB (Treble) to adjust trebles.

ABASS

to adjust basses.

BFAD (Fader) (front/rear volume): adjust using the lever.

14

Image 4
Contents Verona CR Page Front Panel Description FAD Fader front/rear volume adjust using the lever Contents Important Notes Safety NotesWhat You Should Read By All Means Balance Control Amplifier SectionFader control Radio Section Storing a Station Automatically Storing the Stron- gest StationsActivating a Stored Station Briefly Sampling a StationTape Section Inserting the TapeRemoving the Tape Fast Forwarding/Rewinding of the TapeTechnical Data AppendixCare Notes AmplifierBlaupunkt-Werke GmbH Bosch Telecom