Verona CR 43 manual Important Notes, What You Should Read By All Means, Safety Notes

Important Notes Anti-Theft Coding

What You Should Read By All Means!

Before starting to use your new car radio, you should carefully read through the safety no- tes and the information about “Anti-Theft Coding”.

Safety Notes

Road Safety

Being the driver of a motor vehicle you should dedicate your full attention to the traffic around you. Therefore always use your car stereo such that you are able to cope with the present traffic situation in any moment.

In difficult driving situations you should turn your set off. Please take into account that at a speed of 50 km/h you are almost covering a distance of 14 m per second!

When adjusting the volume, always make sure that acoustic signals from the outside can still be heard in order to be able to react to alert signals just as it is required by the present situation.

Your radio is protected against theft by an	our central customer service workshop or to
anti-theft coding system. If, once the unit has	one of our dealers in your vicinity.
been encoded, the power is disconnected	First-time Operation and Restart Follo-
from the set (e.g. theft, disconnection of the
car battery or prior to installation), the set is	wing Interruption of Power Supply
electronically blocked. It may only be used	●	Switch on set.
again after the appropriate code number has		“Cod” will appear in the display:.
been entered (see car radio pass). Hence, a	● Briefly press preset button 1 ;, “000”
coded set is of no use to a potential thief.		will appear in the display :.
Wrong Code Number Entered	● Enter the code number from the Blau-
		punkt car radio pass:
It should not be possible for thieves to ascer-
		Example: Code number is 1521
tain the code number by trial-and-error. This
	●	-	press preset button 1 ; once,
is why the set is blocked for a certain period
of time if an incorrect code number is ente-			“1000” appears in the display:,
red. “---” would then appear in the display:.		-	press preset button 2 ; 5 times,
This time period is 10 seconds following the
			“1500” appears in the display:,
first three attempts, and is increased to 1
		-	press preset button 3 ; 2 times,
hour following subsequent attempts.
			“1520” appears in the display:,
After 19 unsuccessful attempts “OFF” will
		-	press preset button 4 ; once,
appear in the display : and the set can no
			“1521” appears in the display:.
longer be started.
	●	Confirm code number:
Note:		Press upper part of rocker switch /
		2.
Keep your car radio pass, which contains the
	Note:
code number, in a safe place in order to avoid

“unauthorized access” to your car radio. If Using preset button 1 the set can only be

you lose your radio pass and have forgotten	adjusted to “1” or “0”. “0” is not indicated in the
	display.
your code number you will not be able to
	If you have entered and confirmed an incor-
restart the set after the power supply has
	rect code number, “---” will initially appear in
been interrupted. The only way to make the
	the display : and then, after a certain time
set operable again is by sending the radio to

16