The set either samples the stations of storage levels
If a preset button has no station alloca- ted, this button is skipped.
To terminate this function:
●Press the PS rocker switch ? once again.
The station currently sampled is maintained.
Tape Section
Inserting the Tape
If you wish to play a cassette tape:
●switch the set on
●gently insert the cassette with side 1 upwards.
The tape will then be played in the direction it was last played.
Track indication 6 indicates which side is played.
- side A or 1 is played.
- side B or 2 is played (reverse operation).
Removing the Tape
If you wish to remove the tape:
●press the
button 4. The tape is then ejected.
Fast Forwarding/Rewinding of the Tape
Fast Forward
●Press the FF (Fast Forward) button 9. At the end of the tape the set will switch to the other side and resume playing the tape.
Stopping the Fast Forward Operation
●Press the FR button 7.
Fast Rewind
●Press the FR (Fast Rewind) button 7. Once the tape has been completely rewound, the set begins playing the tape.
Stopping the Fast Rewind Operation
●Press the FF button 9.
Autoreverse
If, while a tape is playing, you wish to switch to the other side of that tape:
●press the FF and FR buttons simulta- neously.
At the end of the tape the set will automatical- ly switch to the other side of the tape.
Note:
When playing stiff tapes it is also possible to manually switch to the other side of the tape. If this is the case, check the tape wound up to that point; fast forwarding or rewinding often helps in such cases.
20