Alpine CDA-7893 Storing XM Channel Presets, Receiving Stored XM Channels, Category Search

Page 31

Storing XM Channel Presets

1 Press the BAND button to select the desired band (XM1 or XM2) you want to store.

2 After tuning in the desired channel, press and hold any one of the Preset buttons (1 through 6) that you want to store the station on for at least 2 seconds. The selected station is stored.

3 Repeat the procedure to store up to 5 other channels onto the same band.

To use this procedure for other bands, simply select the band desired and repeat the procedure.

A total of 12 channels can be stored in the preset memory (6 channels for each band; XM1 and XM2).

NOTE

If you store a channel in a preset memory which already has a station, the current channel will be cleared and replaced with the new one.

Receiving Stored XM Channels

1 Press the BAND button to select the desired band

(XM1 or XM2).

→FM1 → FM2 → XM1 → XM2 → AM

2 Press the channel Preset button that has your desired satellite channel in memory.

Category Search

Category Search functionality allows you to search for a specific channel by the category of programming it offers, or to surf within a given category.

1 In XM mode, press the CAT button to display the category of the channel that is currently selected for 5 seconds.

2 While the category is displayed, press the g DN or f UP button to select a different category (or leave it to stay with the same category.)

3 Within 5 seconds of selecting the category, press the CAT button again to select the next channel within that category. Repeatedly press the CAT button within 5 seconds to select additional channels within that category.

When tuned in, the category is displayed for 5 seconds, then the display returns to normal mode.

NOTE

If you cannot find your desired category, the display shows “----” for 2 seconds automatically.

Changing the Display

Text information, such as the channel name, artist name/feature, and song/program title, is available with each XM channel. The unit can display this text information as explained below.

1 In XM mode, press the TITLE button.

Each time you press this button, the display changes as shown below.

→Channeldisplay Number → CLOCKdisplay → Channeldisplay Name

Song Title

←

Artist Name

 

←

display

display

 

 

 

 

NOTES

•When The “Scroll Setting” (refer to page 15) is set to “SCR AUTO”, the display scrolls.

When the CD Text Scroll Setting is set to “SCR MANUAL” (CDA-7892: "SCR MANU"), the display scrolls only when you operate the unit (POWER ON, BAND, etc., are displayed.)

Press and hold the TITLE button for more than 3 seconds to scroll the display again.

•“Channel Number” and “Clock” displays do not scroll.

•Depending on the model, the display may differ from the one shown above.

29-EN

Page 30 Page 32
Image 31
Page 30 Page 32
Contents CDA-7995/CDA-7894 Alpine CD Changers Give You More Contents Information Remote Control OperationMP3 Operation XM Radio OperationPrecautions Never Attempt the Following Basic Operation Audio Mute Function Setting TimeDisplaying Time Setting the Treble Control Setting the Bass ControlAdjusting the built-in Crossover Example 1. Listening Position Front Left Seat About the Time CorrectionExample 2. Listening Position All Seats Bass Focus Example of Steps 2 and 3 SettingTime Difference Table Setting the MX ModeCDA-7995/CDA-7894 only Blackout Mode On and OffQuick Searching Function Changing the Audio Level Display PatternAbout Title and Text Displaying the Title/TextErasing Disc Title/Station Title Titling Discs/StationsDimmer Control Setup OperationSwitching the Tuner Mode Changing Lighting ColorSound Beep Guide Function Turning Mute Mode On/OffScroll Setting Setting the AUX Mode V-LinkSetting the Defeat of the External Input Connecting to an External AmplifierCDA-7894/CDA-7893/CDA-7892 only Demonstration Adjusting Display ContrastCDA-7995 only Radio Operation Manual TuningAutomatic Seek Tuning Manual Storing of Station PresetsTuning to Preset Stations Automatic Memory of Station PresetsOpening and Closing the Movable display CD Player OperationPlayback Fast Forward and Backward Music Sensor SkipRepeat Play Controlling CD Changer Optional When a 12-disc CD Changer is connectedX. Random Play Scanning ProgramsMulti-Changer Selection Playing MP3 Files MP3 OperationPlaying MP3 Files with the CD Changer Optional File Search Selecting FoldersAbout MP3 Setting the Range of MP3 File SelectionWhat is MP3? Playing MP3 DataTerminology Receiving XM Channels with the XM Receiver Optional XM Radio OperationChecking the XM Radio ID Number Changing the Display Storing XM Channel PresetsReceiving Stored XM Channels Category SearchControls on Remote Control Remote Control OperationBattery Replacement Case of Difficulty InformationNo Magzine Antenna FM Tuner Section SpecificationsPrecautions Installation and ConnectionsRemoval Installation38-EN ConnectionsTo prevent external noise from entering the audio system Antenna Receptacle Power Antenna Lead BluePage ALPINE-1 Limited Warranty
Top Page Image Contents