Alpine CDA-7892, CDA-7894, CDA-7893 owner manual Audio Mute Function, Displaying Time, Setting Time

Page 8

Basic Operation

g DN BAND

MODE (Rotary encoder)

f UP X-OVER CENTER f CLK MUTE

Adjusting Volume/Balance (Between

Left and Right)/Fader (Between Front

and Rear)/Defeat

1 Press the MODE (Rotary encoder) button repeatedly to choose the desired mode.

Each press changes the modes as follows:

BALANCE FADER DEFEAT

SUBWOOFER*VOLUME

Volume : 0 ~ 35

Balance : L15 ~ R15

Fader: R15 ~ F15

Subwoofer: 0 ~ +15

NOTES

If the MODE button is not pressed within 5 seconds after selecting the BALANCE, FADER, DEFEAT or SUBWOOFER mode, the unit automatically returns to the VOLUME mode.

*When the subwoofer mode is OFF, its level cannot be adjusted.

2 Turn the Rotary encoder until the desired sound is obtained in each mode.

By setting Defeat ON, previously adjusted settings of BASS, TREBLE will return to the factory defaults, but MX will be turned off.

NOTE

Depending on the connected devices, some functions and display indications do not work.

Audio Mute Function

Activating this function will instantly lower the volume level by 20 dB.

1 Press the MUTE button to activate the MUTE mode. The audio level will decrease by about

20 dB.

Pressing the MUTE button again will bring the audio back to its previous level.

Displaying Time

1 Press the CLK (clock) button repeatedly until the time is displayed.

Each press changes the modes as follows:

Radio mode

 

 

 

 

Radio frequency

Clock priority

TITLE mode

 

 

 

 

 

 

 

mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CD Player/Changer modes

Playingmode time Clockmode priority DISCmodeTEXT *

 

 

TRACK

*

TITLE mode

 

TEXT mode

 

 

 

 

 

NOTES

Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display.

When the power is off but the ignition key is on, press the CLK button to display the time.

•∗ For CDA-7893/CDA-7892 models, the display above is shown with a CD-TEXT compatible changer connected.

Setting Time

1 In the Clock priority mode, press and hold the CLK (clock) button for at least 3 seconds while the time is displayed. The time indication will blink.

2 Turn the Rotary encoder to adjust the hours while the time indication is blinking.

3 When the hour has been adjusted, press the Rotary encoder.

4 Turn the Rotary encoder to adjust the minutes while the time indication is blinking. The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing the Rotary encoder.

6-EN

Image 8
Contents CDA-7995/CDA-7894 Alpine CD Changers Give You More Contents Remote Control Operation MP3 OperationXM Radio Operation InformationPrecautions Never Attempt the Following Basic Operation Displaying Time Setting TimeAudio Mute Function Adjusting the built-in Crossover Setting the Bass ControlSetting the Treble Control Example 2. Listening Position All Seats About the Time CorrectionExample 1. Listening Position Front Left Seat Example of Steps 2 and 3 Setting Bass FocusSetting the MX Mode Time Difference TableBlackout Mode On and Off Quick Searching FunctionChanging the Audio Level Display Pattern CDA-7995/CDA-7894 onlyDisplaying the Title/Text About Title and TextTitling Discs/Stations Erasing Disc Title/Station TitleSetup Operation Switching the Tuner ModeChanging Lighting Color Dimmer ControlTurning Mute Mode On/Off Scroll SettingSetting the AUX Mode V-Link Sound Beep Guide FunctionCDA-7894/CDA-7893/CDA-7892 only Connecting to an External AmplifierSetting the Defeat of the External Input CDA-7995 only Adjusting Display ContrastDemonstration Manual Tuning Automatic Seek TuningManual Storing of Station Presets Radio OperationAutomatic Memory of Station Presets Tuning to Preset StationsPlayback CD Player OperationOpening and Closing the Movable display Repeat Play Music Sensor SkipFast Forward and Backward When a 12-disc CD Changer is connected X. Random PlayScanning Programs Controlling CD Changer OptionalMulti-Changer Selection Playing MP3 Files with the CD Changer Optional MP3 OperationPlaying MP3 Files Selecting Folders File SearchSetting the Range of MP3 File Selection What is MP3?Playing MP3 Data About MP3Terminology Checking the XM Radio ID Number XM Radio OperationReceiving XM Channels with the XM Receiver Optional Storing XM Channel Presets Receiving Stored XM ChannelsCategory Search Changing the DisplayRemote Control Operation Controls on Remote ControlBattery Replacement Information Case of DifficultyNo Magzine Antenna Specifications FM Tuner SectionInstallation and Connections PrecautionsInstallation RemovalConnections 38-ENAntenna Receptacle Power Antenna Lead Blue To prevent external noise from entering the audio systemPage Limited Warranty ALPINE-1